Electrolux Refrigerator Error Code loc

The "loc" indicator on an Electrolux refrigerator, specifically DF80 and DF80X models, means the control panel is locked. In this state, the touchpad buttons will not respond to presses, preventing any accidental changes to your temperature or operating settings. It is a built-in feature, not a malfunction or fault condition.

No, the "loc" indicator does not indicate any safety issue or mechanical problem with your refrigerator. The appliance will continue to cool and operate normally with the panel locked. The only limitation is that you cannot adjust settings from the control panel until it is unlocked.

If the unlock button combination does not work due to a faulty keypad membrane or control board, repair costs will vary depending on the specific part needed and labor rates in your area. Keypad membrane replacements tend to be less expensive, typically in the range of $20 to $80 for the part. Control board replacements are more involved and can range from $100 to $300 or more for parts alone, with additional labor costs if a technician is required.

Press and hold the FREEZER TEMPERATURE and AUTOCONTROL buttons at the same time for approximately 3 seconds. The "loc" indicator should turn off and the control panel will return to normal operation. If it does not clear, check whether the keypad buttons are physically responsive or if the panel may need to be serviced.

Unplugging the refrigerator or cycling power will generally not clear the "loc" indicator because the control board stores the lock state in memory. The correct way to clear it is to use the FREEZER TEMPERATURE and AUTOCONTROL button combination held for 3 seconds. A full power reset is not a reliable solution for this condition.