Frigidaire Oven Error Code E

The E code on a Frigidaire oven means the electronic control board has detected a fault or error condition somewhere in the oven's monitored systems. It is a general alert rather than a code tied to one specific component. Pressing the OFF key is the first step, followed by a full power cycle if the code returns. If the fault persists after that, professional diagnosis is needed.

You should not attempt to cook while the E error is actively displayed, as the control board has flagged that it cannot confirm normal operation. Press OFF to clear the code before using the oven. If the code clears and does not return during a bake or broil test, operation can resume. If the error reappears, stop using the oven and call for service to avoid potential safety issues from unmonitored temperatures.

The E code is serious if it returns immediately after pressing OFF, comes back after a complete five-minute power cycle, or reappears during a bake or broil test. A code that clears and stays gone after a reset is usually the result of a temporary glitch. Repeated or persistent faults indicate an underlying component issue, such as a failing sensor, keypad, or control board, that requires hands-on diagnosis by a qualified technician.

In many cases, yes. Press the OFF key on the control panel first to attempt a quick clear. If the code comes back, turn off power to the oven at the breaker or by unplugging it, wait five minutes, then restore power and set the clock. After resetting, test bake or broil to confirm the fault is gone. If the E code returns during or after that test, a component-level problem is likely present.

Repair costs vary depending on the root cause. If the fault is simply a control board reset issue, there may be no parts cost at all. Replacing a keypad membrane or oven temperature sensor typically runs in the range of $80 to $200 for parts, plus labor. A full electronic control board replacement can range from $150 to $400 or more for parts depending on the model. A service call fee generally applies on top of parts and labor costs.