Frigidaire Range Error Code F001

F001 indicates a touch failure on the oven user interface board, which is the control panel that processes your touch inputs. The board has detected an internal fault in its touch sensing circuitry. This can be a temporary glitch or a permanent hardware failure, depending on whether it clears after a power reset.

An F001 fault means the touch control panel is not functioning reliably, so you may not be able to enter commands or control the oven properly. It is best to avoid using the range for cooking until the fault is diagnosed and resolved, since unreliable control inputs could lead to unintended operation.

A knowledgeable DIYer comfortable working with appliance electronics can often replace the user interface board after confirming the part number for their specific model. Always disconnect power completely before beginning any repair. If you are uncertain about working with appliance control boards, a qualified technician is the safer option.

Sometimes. Disconnecting power to the range for at least 30 seconds and then restoring it will clear a transient fault. If the F001 code returns immediately when power is reapplied, the user interface board has a confirmed internal failure and a reset will not resolve it.

If the error requires replacing the oven user interface board, parts typically range from around $80 to $250 depending on the specific model, with professional labor adding another $100 to $200. If the fault clears with a power reset, there is no parts cost involved.