Model reference

Frigidaire GCFG3060BDA

Range

5 documents45 error codes

Available documentation

Tech Sheet

SERVICE DATA SHEET - Gas Range with PUX Electronic Oven Control4 pg
Covers this model

Service Flash

SERVICE FLASH CKSF251B Slow Ignition of Bake Burner2 pg
Covers this model
Service Flash CKSF2611 Bake Burner Ignition Issues6 pg
Covers this model

Tech Tip

Convection Fan Motor Delay1 pg
Covers this model
Tech Tip CKTT2432 Peregrine Error Codes_20665613 pg
Covers this model

MyPros+ Max

Diagnose your Frigidaire GCFG3060BDA.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Frigidaire Range

F001 on my Frigidaire GCFG3060BDA

M+

Touch failure on the oven user

From Service Manual 431248, p.20:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part 5304504863

Electronic control board

Error codes (45)

CodeMeaning

F001Touch failure on the oven user interface board.F002Touch failure on the oven user interface board.F003The oven user interface board is incorrectly configured.F004Touch failure on the oven user interface board.F005Touch failure on the oven user interface board.F010Oven temperature runaway F011Stuck key F012Keyboard configuration alarm F013Data written to non-volatile memory has failed verification.F015Keyboard error.F017The oven user interface board is unable to configure the touch.F018Oven relay board failure (wiggler).F019The oven user interface board is unable to configure the oven relay board.F020Communication failure between the oven user interface board and the cooktop…F022Communication failure between the oven user interface board and the oven relay…F023Communication failure between the oven user interface microcontroller and the…F025The communication between the oven user interface and the oven relay board…F027The communication between the oven user interface and the oven relay board…F028The communication between the oven user interface microcontroller and the touch…F029The communication between the oven user interface microcontroller and the touch…F030Open oven temperature sensor (RTD).F031Shorted oven temperature probe (RTD).F033Meat probe temperature sensor shorted or too hot (triggered if meat probe sees…F050A/D Out of Range F090MDL mechanism failure F095MDL mechanism failure F096The oven door has been detected open during a self-clean cycle.F097MDL invalid state F098Magnetron case sensor probe shorted (NTC sensor on the magnetron has failed).F099Magnetron case sensor probe open (NTC sensor on the magnetron has failed).

View all 45 error codes

F100Magnetron case sensor temperature over-temp limit F101Magnetron auto power limit active based on temperature over-temp F102Magnetron auto power limit active based on runtime limit exceeded F104Loss of communication between GPU and OUI.F105Wake up procedure failure between OUI and GPU F106GPU configuration error F107Loss of communication between OUI and NIU F108NIU provisioning failed (Connection Fail)F109OTA (over-the-air) update failed F110NIU serialization failed (manufacturing only, not at user end)F111Touch screen error from GPU F45Cooling fan speed low in upper cavity (Microcombi will display F45 for lower…F46Cooling fan speed high in upper cavity (Microcombi will display F46 for lower…F47Cooling fan speed low in lower cavity.F48Cooling fan speed high in lower cavity.

Related Frigidaire range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass