Frigidaire Range Error Code F005

F005 indicates a touch failure on the oven user interface board. The control system has detected that the touchpad circuitry is not responding correctly, which prevents normal oven operation. The fault may be caused by a power glitch, contamination, or a hardware failure within the board itself.

A DIYer comfortable with appliance repair can often handle this repair. The first step is always a power reset to rule out a temporary glitch. If the fault persists, the repair involves accessing the control panel, disconnecting the interface board, and installing a replacement unit. Make sure power is fully disconnected before opening the control panel area.

If the repair requires replacing the oven user interface board, parts typically range from roughly $75 to $250 depending on the specific model. If you hire a technician, expect labor costs to add another $75 to $150 on top of the part price. A power reset costs nothing and is always worth trying first before purchasing any parts.

A power reset will sometimes clear F005 if the fault was triggered by a temporary voltage issue rather than a hardware failure. Disconnect power to the range, wait a full 30 seconds, then restore power and check whether the code returns. If F005 comes back immediately after power is restored, the user interface board has a persistent failure and resetting will not resolve it.

When F005 is active, the oven's touch controls are not functioning reliably, which means you may not be able to set temperatures or modes accurately. It is best to avoid using the oven until the fault is resolved to prevent unintended operation. The surface burners on a gas or dual-fuel range may still operate independently, but confirm all controls respond correctly before use.