mypros+
Error code reference

Frigidaire Range Error Code F002

Touch failure on the oven user interface board.

Frigidaire codesFrigidaire range codes
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the F002 error code actually means

Your Frigidaire range is displaying F002 because the touch control panel is not working properly and the oven's electronics have detected a problem with it. This is similar to a touchscreen that stops responding or behaves erratically. Unplugging the range for 30 seconds may clear the issue, but if the error comes back right away, the control panel board will need to be replaced.

Diagnostic procedure

The full F002 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Disconnect power, wait 30 seconds and reapply power. If fault returns upon power-up replace the oven user interface board.
Unlock with pass
Unlock with pass
Unlock with pass
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock F002 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of F002

Ranked by how often they cause this code
  1. 1Failed oven user interface board
  2. 2Transient power disruption or voltage spike
  3. 3Moisture or grease contamination on the touch surface
  4. 4Loose or damaged ribbon cable connection
  5. 5Worn or physically damaged touch surface

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about F002

What does F002 mean on a Frigidaire range?
F002 indicates a touch failure on the oven user interface board. The range's control system has detected that the touch panel is not responding or is generating invalid signals. This fault disables normal oven operation until the condition is resolved. A power reset is the first step, and if the code persists, the user interface board requires replacement.
Can I still use my oven if it is showing F002?
With an active F002 fault, the touch controls on the user interface board are not functioning reliably, which means oven functions may not respond correctly or at all. Attempting to operate the oven in this state is not recommended because you cannot verify that temperature or mode settings are being received properly. It is best to resolve the fault before using the appliance.
Is the F002 error on a Frigidaire range a safety hazard?
The F002 fault itself is a control board communication error and does not indicate a gas leak, electrical short, or fire risk. However, because the touch interface is malfunctioning, you cannot reliably control oven functions, which makes operating the range inadvisable until the fault is resolved. Discontinue use and address the fault before cooking again.
Will resetting the range clear the F002 error code?
Disconnecting power for 30 seconds and reapplying it will clear a transient or software-based F002 fault caused by a voltage fluctuation. However, if the code returns immediately when power is restored, the board has a persistent hardware failure and a reset will not resolve it. In that case, replacement of the oven user interface board is required.
How much does it cost to fix the F002 error on a Frigidaire range?
If the fault clears with a power reset, there is no parts cost. If the oven user interface board needs replacement, the part alone typically costs in the range of $100 to $300 depending on the specific model. Professional labor to diagnose and install the board can add $100 to $200 or more to the total repair cost.

Related Frigidaire range error codes

All Frigidaire range codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass