Frigidaire Range Error Code F01

F01 on a Frigidaire range indicates a Touch Panel Failure, meaning the User Interface board has been detected as defective or non-communicative. The UI board is the electronic component behind the touchpad that processes all user inputs. The range displays this code to signal that normal control operation cannot be guaranteed.

It is generally not advisable to continue using the range while F01 is active. A failed UI board can make controls unresponsive or unreliable, which means you may not be able to set temperatures accurately or turn the oven off through normal inputs. Avoid using the appliance until the fault has been diagnosed and resolved.

If the fix is simply reseating a loose connector, there is no parts cost involved. If the User Interface board needs replacement, parts and labor costs can typically range from around $150 to $400 or more depending on your specific model and local labor rates. Getting a diagnostic visit from a qualified technician can help confirm whether board replacement is necessary before committing to the repair.

A power reset is the recommended first step and can clear the F01 code if the fault was caused by a temporary glitch or power fluctuation. Disconnect the range from its power supply, wait at least 30 seconds, and then restore power. If the F01 code reappears after the reset, the UI board or its wiring connections require further inspection.

Start by unplugging the range or switching off its circuit breaker for 30 seconds, then restore power to see if the code clears. If it returns, check that all wiring harness connectors on the UI board are fully and correctly seated. If the code persists after those steps, the User Interface board is likely defective and will need to be replaced.