Frigidaire Range Error Code LEDs 5+7

LEDs 5+7 on a Frigidaire range indicates that the electronic control board performed a self-check and detected an incorrect Micro ID, meaning the board cannot verify the integrity of its own microcontroller. This is an internal board-level fault and not related to any external sensor or wiring. The control board must be replaced to resolve this error.

Resetting the range by disconnecting power will not clear the LEDs 5+7 error. Because this fault is caused by a hardware-level failure within the control board's microcontroller, the error will return every time the board runs its self-check at startup. Only replacing the control board will permanently resolve the fault.

The cost to repair this error depends on the specific range model and whether you hire a technician or perform the repair yourself. Control board replacement parts typically range from $150 to $400 depending on the model. Adding professional labor, total repair costs can range from $250 to $600 or more. Getting a diagnosis and quote from a technician before committing to the repair is advisable.

The required repair is replacement of the electronic control board. A knowledgeable DIYer comfortable working with appliance electronics can perform this replacement, but it does require disconnecting the range from power and handling internal electrical components safely. If you are not confident working inside the appliance, a qualified technician should perform the repair.

When the control board detects a Micro ID failure, it cannot confirm that its internal processing is functioning correctly. Operating the range under these conditions is not recommended because the board may not reliably control cooking functions or respond correctly to safety-related inputs. The appliance should remain unused until the control board is replaced.