Skip to main contentGet Started
Error code reference
GE Oven Error Code F0-E0
Default F code-no failure.
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
What the F0-E0 error code actually means
The F0-E0 code on your GE oven is not an error. It simply means the oven's control system checked for problems and found none. Press the CANCEL button to make the display return to normal.
Diagnostic procedure
The full F0-E0 procedure
Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.
MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Will only be displayed if user presses and holds UPPER OFF key for 5 seconds and there is no pre-existing fault. Press CANCEL to clear display.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock F0-E0 procedure $9.95
Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.
Most common causes of F0-E0
Ranked by how often they cause this code
- 1Intentional diagnostic key sequence
- 2Accidental key hold activation
- 3Stuck or sticking UPPER OFF keypad button
- 4Keypad membrane degradation
Most DIYers save hundreds by diagnosing before ordering parts.
Get Started
$29/month · Cancel anytime · Or $9.95 3-day pass
Questions people ask about F0-E0
What does F0-E0 mean on a GE oven?
F0-E0 is the default status code on GE ovens and does not indicate any fault or failure. It appears only when the UPPER OFF key is held for 5 seconds as part of a built-in diagnostic check. When the control board runs this check and finds no stored faults, it displays F0-E0 to confirm the system is clear. Press CANCEL to return the oven to normal operation.
Is it safe to use my GE oven when F0-E0 is displayed?
Yes, it is safe to use the oven when F0-E0 is displayed. This code confirms there are no active faults in the system rather than alerting you to a problem. Press CANCEL to clear it and use the oven normally.
How much does it cost to repair a GE oven showing F0-E0?
In most cases, F0-E0 requires no repair and therefore no cost beyond a service call if a technician is already involved. If the code is appearing repeatedly due to a sticking or faulty UPPER OFF keypad membrane, replacing the membrane keypad assembly typically costs between $50 and $150 for the part, plus labor if professionally installed.
How do I fix the F0-E0 code on my GE oven?
No repair is required for the F0-E0 code because it does not represent a malfunction. Simply press the CANCEL key to clear the display. If the code keeps reappearing without you holding the UPPER OFF key, inspect that key for sticking or damage, as a continuously depressed key could be triggering the diagnostic mode on its own.
Will resetting my GE oven clear the F0-E0 code?
Pressing the CANCEL key is all that is needed to clear the F0-E0 display. A full power reset by unplugging the oven or tripping its circuit breaker for a few minutes will also clear the display. Because this is not a fault code, it will not return unless the diagnostic key sequence is triggered again.
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass