GE Oven Error Code F1-E0

F1-E0 on a GE oven indicates an electronic control malfunction, with E0 identifying the specific sub-fault within the F1 control error category. The code means the oven's main control board has detected an internal failure or is receiving an unexpected signal. Diagnostics begin with the oven door switch, and if that component tests correctly, the control board itself is typically the failed part.

Disconnecting power to the oven for several minutes may temporarily clear the F1-E0 code, but if there is an underlying hardware fault in the door switch or control board, the error will return during normal operation. A reset alone is not a repair and should only be used as a first step to confirm whether the fault is persistent or intermittent.

If only the door switch needs replacement, parts and labor costs are generally in the range of $75 to $175 depending on the model and service rates in your area. If the electronic control board requires replacement, the total cost including parts and labor typically ranges from $200 to $450 or more, as control boards are among the more expensive components in an oven.

A knowledgeable DIYer can perform the initial diagnostic steps: disconnecting power and testing the oven door switch for proper operation and continuity. If the door switch is faulty, replacing it is a manageable repair for someone comfortable working with appliances. If the switch tests fine and the fault returns, replacing the control board is the next step, which is also DIY-possible but requires careful handling of electrical components and proper part matching.

It is not recommended to continue using the oven while the F1-E0 code is active. A malfunctioning electronic control board can behave unpredictably, potentially affecting temperature regulation or safety interlocks. Power should be disconnected until the fault is properly diagnosed and the faulty component is replaced.