GE Oven Error Code F1-E1

F1-E1 on a GE oven indicates an electronic control malfunction, specifically an E1 fault code generated by the main control board. The board has detected an internal error it cannot resolve on its own. The diagnostic process starts with checking the oven door switch, and if that component is functioning correctly, the control board itself is the indicated failed part.

Disconnecting power to the oven may temporarily clear the code, but if the underlying cause is a failed door switch or a damaged control board, the F1-E1 fault will return once power is restored and the oven attempts to operate. A power reset is a useful first step to confirm the fault is persistent, but it does not fix the root cause.

If the door switch is the cause, parts typically range from around $15 to $50 depending on the model, making it a relatively low-cost repair. If the control board requires replacement, parts alone can range from approximately $150 to $350 or more, with professional labor adding to that total. Getting a diagnosis from a qualified technician before purchasing parts is the best way to avoid unnecessary expense.

A knowledgeable DIYer can perform the basic diagnostic steps, including disconnecting power and inspecting the oven door switch for obvious damage or misalignment. If the door switch is the problem, replacing it is a relatively straightforward repair. Replacing the control board is more involved and requires comfort with electrical components and proper safety precautions, including fully disconnecting power before starting any work.

Operating the oven with an active F1-E1 code is not recommended. An electronic control malfunction means the board may not be able to accurately regulate oven temperature or manage safety functions such as self-clean lockout. Discontinue use until the door switch has been inspected and, if necessary, the control board has been replaced.