GE Oven Error Code F1-E4

F1-E4 on a GE oven indicates an internal electronic control board malfunction. The F1 code identifies the control board as the source of the fault, and E4 specifies the sub-fault type detected by the board's self-diagnostic routine. This error means the control board has failed in a way that prevents normal oven operation and requires board replacement.

It is not advisable to continue using the oven when the F1-E4 code is active. A malfunctioning control board may not regulate oven temperature correctly or may behave unpredictably. Discontinue use until the board has been replaced.

The cost depends on whether you replace the board yourself or hire a technician. A replacement electronic control board for a GE oven typically ranges from around $150 to $350 or more depending on the model. Adding professional labor costs can bring the total repair estimate to roughly $250 to $500 or higher.

The repair involves disconnecting power to the oven and replacing the electronic control board. A technically confident DIYer comfortable working with appliance electronics can perform this repair. However, if you are unfamiliar with safely accessing oven control components, a qualified technician is recommended.

Disconnecting power may temporarily clear the error from the display, but F1-E4 is caused by an internal board fault and is likely to return once power is restored. A reset is not a permanent fix, and board replacement is the correct solution.