GE Oven Error Code F11

F11 on a GE oven indicates a fault in the upper or single oven door latch switch circuit. The control board is not receiving a valid signal to confirm whether the door is locked or unlocked. This is most commonly caused by a faulty latch switch, damaged wiring, or a poor connection at the CN1 connector on the control board.

You should not attempt to use the oven while F11 is active. The fault involves the door latch circuit, which is a safety-critical system tied to the self-clean function. The oven may restrict operation to prevent unsafe conditions until the fault is resolved.

Repair costs vary depending on the failed component. A door latch assembly replacement typically costs between $80 and $200 in parts, with additional labor costs if a technician is hired. Control board replacement is more expensive, often ranging from $150 to $350 or more for the part alone. Simple wiring or connector repairs may cost significantly less.

Some causes of F11 are DIY-accessible, such as reseating a loose connector at CN1 or inspecting the latch wiring for visible damage. However, replacing the door latch assembly or the control board involves working near high-voltage components, so comfort with appliance repair and proper safety precautions are essential. If you are unsure, a qualified technician should handle the diagnosis.

Resetting the oven by cycling power at the breaker may temporarily clear the F11 code, but the error will return if the underlying fault is not repaired. A reset is useful for confirming whether the code is intermittent, but it does not fix a failed switch, damaged wiring, or faulty connector.