mypros+
Error code reference

GE Oven Error Code F2-E0

Keypad keytail not connected.

GE codesGE oven codes
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the F2-E0 error code actually means

Your oven's control panel is not communicating properly with the main control board, most likely because the ribbon cable connecting the two has come loose or failed. The oven detected this missing connection and displayed an error to let you know. In many cases, simply unplugging the oven, reseating the cable connection, and restoring power will clear the problem.

Diagnostic procedure

The full F2-E0 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
1. Disconnect power or unplug oven. 2. Check keypad connector for firm connection. 3. Press CANCEL. If error code returns after 60 sec., replace keypad.
Unlock with pass
Unlock with pass
Unlock with pass
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock F2-E0 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of F2-E0

Ranked by how often they cause this code
  1. 1Loose keypad keytail connector
  2. 2Failed or damaged keypad assembly
  3. 3Kinked or torn ribbon cable
  4. 4Corrosion on connector contacts

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about F2-E0

What does F2-E0 mean on a GE oven?
F2-E0 means the oven's control board has detected that the keypad keytail ribbon connector is not properly connected or is not transmitting a signal. This code points to a communication break between the touchpad and the control board. It can result from a loose connector, a damaged ribbon cable, or a failed keypad assembly.
Will resetting the oven clear the F2-E0 code?
Pressing CANCEL after restoring power will attempt to clear the code. If the underlying connection problem is resolved, the code will not return. However, if the keypad ribbon is damaged or the keypad itself has failed, the error will reappear within about 60 seconds and a reset alone will not fix it.
How much does it cost to fix a GE oven F2-E0 error?
If the fix is simply reseating a loose connector, there is no parts cost involved. If the keypad assembly needs replacement, parts typically range from $50 to $150 depending on the model, with professional labor adding $100 to $200 or more. Diagnosing the fault yourself before calling a technician can help avoid unnecessary service charges.
Can I fix the F2-E0 error myself without replacing parts?
Yes, in many cases. Disconnect power to the oven, locate the ribbon connector between the keypad and the control board, and press it firmly into place. Restore power and press CANCEL. If the error does not return within 60 seconds, the problem was simply a loose connection and no parts are needed.
Is it safe to use my GE oven while the F2-E0 code is displayed?
Operating the oven with an active F2-E0 fault is not recommended. A disconnected keypad means the control board may not reliably receive input commands, which could result in unpredictable behavior. Disconnect power until the fault is diagnosed and resolved.

Related GE oven error codes

All GE oven codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass