KitchenAid Dishwasher Error Code Anti-Bacterial/Heavy + China Gentle + Quick Wash + Quick Rinse

This combination of illuminated indicator lights signals a wash heater current sense error. The dishwasher's control board monitors the current drawn by the wash heater element and detected a reading outside the expected range. This causes the dishwasher to stop the cycle and display this light pattern as a diagnostic fault code. The issue points to the heater element, its wiring, or the control board itself.

It is not advisable to continue running the dishwasher while this fault is present. A heater circuit fault can indicate a shorted element or wiring issue that poses a potential electrical hazard. The dishwasher should be inspected and repaired before returning it to regular use.

Repair costs vary depending on the failed component. A replacement heater element typically ranges from around $30 to $80 for the part alone, while a replacement control board can range from $100 to $250 or more. If hiring a technician, labor costs will add to these figures, with total repair bills commonly ranging from $150 to $400 depending on the component replaced and local labor rates.

A knowledgeable DIYer can perform some of the diagnostics, such as testing the heater element's resistance with a multimeter and inspecting the wiring harness for obvious damage. Replacing the heater element is a moderately complex repair that involves accessing the interior of the dishwasher tub. Control board replacement is also within reach for experienced DIYers, but misdiagnosis can be costly, so careful component testing before purchasing parts is strongly recommended.

A reset may temporarily clear the fault lights, but the error will return if the underlying problem has not been resolved. If the heater element is failed or shorted, or if a wiring fault exists, the control board will detect the abnormal current condition again as soon as the wash cycle attempts to activate the heater. A reset alone is not a fix for this error.