mypros+
Error code reference

LG Air Conditioner Error Code 113

Outdoor unit liquid pipe (condenser) temperature sensor error

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the 113 error code actually means

Your LG air conditioner has detected a problem with a small temperature sensor located on the outdoor unit that monitors refrigerant in the liquid line. Either the sensor has failed or a wiring connection has come loose or broken. The system has stopped normal operation until this sensor issue is resolved.

Diagnostic procedure

The full 113 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Check temperature sensor connector connections; check sensor resistance value.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock 113 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of 113

Ranked by how often they cause this code
  1. 1Loose or corroded sensor connector
  2. 2Failed liquid pipe temperature sensor
  3. 3Damaged wiring harness
  4. 4Water intrusion at the sensor or connector
  5. 5Faulty outdoor unit control board

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about 113

What does 113 mean on a LG air conditioner?
Error code 113 indicates a fault with the outdoor unit liquid pipe temperature sensor. The control board has detected either an open circuit or a short circuit condition on this sensor. This prevents the system from accurately monitoring refrigerant temperature at the liquid line, so the unit shuts down as a protective measure.
Is it safe to keep running my AC with error code 113?
The unit will generally not allow normal operation while error code 113 is active, which is itself a protective response. Attempting to bypass or ignore this fault is not recommended, as the control board loses visibility into liquid line temperature. Running the system without reliable sensor feedback risks operating under abnormal refrigerant conditions that could cause further component damage.
How much does it cost to repair error code 113 on an LG air conditioner?
If only the connector needs reseating or cleaning, there may be little to no parts cost, with any expense coming from a service call fee. Replacing the liquid pipe temperature sensor itself typically costs between 15 and 60 dollars for the part, plus labor. If the control board is at fault, parts and labor costs can range from 200 to 600 dollars or more depending on the unit model and local labor rates.
Can I fix error code 113 myself?
A homeowner with basic electrical knowledge can start by checking whether the sensor connector in the outdoor unit is securely seated and free of corrosion, which sometimes resolves the error. Testing the sensor resistance or inspecting the wiring harness for damage requires a multimeter and comfort working inside the outdoor unit. Full sensor replacement or control board diagnosis is typically better handled by a qualified technician, particularly since the refrigerant system is involved.
Will resetting the unit clear error code 113?
A power reset may temporarily clear the error display, but if the underlying sensor fault is still present the code will return once the system attempts to operate. Resetting is a reasonable first step to confirm whether the fault is intermittent or persistent, but it does not repair a failed sensor, damaged wire, or bad connector. Persistent return of code 113 after a reset requires hands-on diagnosis.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass