mypros+
Error code reference

LG Air Conditioner Error Code E573

Error due to using single type outdoor unit in a module installation.

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the E573 error code actually means

Your LG air conditioner is showing an error because the outdoor unit connected to your system is not the right type for the way the system is set up. It is meant to work with multiple linked outdoor units, but it is detecting a unit that is not compatible with that setup. A technician will need to check the equipment model and its internal settings to resolve this.

Diagnostic procedure

The full E573 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Verify outdoor unit model supports module installation; check EEPROM.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock E573 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of E573

Ranked by how often they cause this code
  1. 1Incompatible outdoor unit model installed
  2. 2Corrupted or incorrect EEPROM data
  3. 3Outdoor unit control board failure
  4. 4Incorrect system wiring or unit addressing
  5. 5Wrong unit substituted after a service replacement

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about E573

What does E573 mean on a LG air_conditioner?
E573 indicates that the system has detected a single-type outdoor unit where a module-compatible outdoor unit is required. The system reads the outdoor unit's EEPROM during startup to verify compatibility, and this error is triggered when that check fails. It is a configuration mismatch error, not a mechanical or refrigerant fault. A technician needs to verify the outdoor unit model and inspect the EEPROM data to resolve it.
Is it safe to keep running my LG air conditioner with an E573 error?
No, continuing to operate the system with E573 active is not recommended. The error indicates a configuration incompatibility that the system has flagged to prevent improper operation. Running the unit under these conditions could result in component damage or unreliable system behavior. The system should be serviced before returning to normal operation.
How much does it cost to repair an LG air conditioner E573 error?
Repair costs for E573 vary depending on the root cause. If the issue is limited to EEPROM reprogramming, costs may be relatively modest, generally in the range of a standard diagnostic and labor fee. If the outdoor unit control board requires replacement, costs can range from a few hundred to over a thousand dollars depending on parts and labor rates. If an entirely incompatible outdoor unit was installed, the cost of a correct replacement unit will be the primary expense.
Can I fix E573 myself without a technician?
In most cases, resolving E573 requires professional service. The diagnosis involves checking the outdoor unit model for module compatibility and reading or reprogramming the EEPROM, which requires specialized tools and training. If the wrong outdoor unit model was installed, a hardware replacement is necessary. This is not a user-serviceable error.
Will resetting the unit clear the E573 error?
A simple power reset will not permanently clear E573 because the error is tied to the EEPROM configuration data in the outdoor unit. Each time the system initializes, it reads the EEPROM and will re-trigger the error if the underlying compatibility issue has not been resolved. The root cause, either an incompatible unit or corrupted EEPROM data, must be corrected first.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass