LG Refrigerator Error Code 39E
Ice Maker(FZ) Function Error
Ice Maker(FZ) Function Error — freezer ice maker error occurred more than 3 times.
First step from the service manual
Replace the Ice Maker and check if it operates normally.
The complete diagnostic procedure includes additional test steps, resistance specifications, wiring diagram references, and component test points.
Get the full diagnostic procedure for 39E.
- Step-by-step tests with expected resistance, voltage, and continuity values
- Wiring diagram references and connector pinouts from the OEM service manual
- Verified part numbers when replacement is required
$29/month · Cancel anytime · Or $9.95 3-day pass
What 39E means on a LG refrigerator
The 39E error code on an LG refrigerator indicates a freezer ice maker function error that has been detected and logged more than three times. This threshold-based triggering means the control board is not registering a one-time or intermittent glitch but rather a persistent, repeating failure within the ice maker assembly located in the freezer compartment. Once the fault cycle count exceeds three occurrences, the board flags the 39E code and halts normal ice making operations to prevent further mechanical stress or water-related damage.
The freezer ice maker is a self-contained assembly that includes a motor, a thermostat, a heating element for harvest cycles, and various sensors that communicate cycle completion back to the main control board. When any of these internal components fail or fall out of acceptable operating parameters, the ice maker cannot complete its harvest cycle correctly. This type of repeated functional failure points strongly toward a fault within the ice maker unit itself rather than an upstream component like the water inlet valve or ice maker wiring harness, which is why the primary diagnostic step is to replace the ice maker assembly and confirm normal operation afterward.
Source: manufacturer service documentation.
Common causes of 39E
- 01
Failed Ice Maker Assembly
Part replacementThe ice maker unit itself is the most likely culprit when the 39E error repeats more than three times. An internal component failure within the assembly, such as the harvest motor, thermostat, or heating element, prevents the ice maker from completing its cycle correctly.
- 02
Ice Maker Wiring or Connector Issue
Wiring / connectionLoose, damaged, or corroded wiring connections between the ice maker and the control board can cause repeated communication failures that trigger the 39E code. Inspect the wiring harness and connectors at the ice maker for damage or poor contact before replacing the assembly.
- 03
Ice Maker Sensor or Thermostat Fault
Part replacementThe ice maker relies on internal temperature sensing to time its harvest cycles. If the thermostat or sensor within the unit has drifted or failed, the control board will not receive the expected cycle completion signal, causing repeated errors.
- 04
Freezer Temperature Too High
Wiring / connectionIf the freezer compartment is not maintaining a cold enough temperature, the ice maker cannot freeze water properly and will repeatedly fail to complete cycles. Check that the freezer is holding at or near 0 degrees Fahrenheit and that the evaporator fan is running.
- 05
Main Control Board Communication Fault
Part replacementIn less common cases, a fault on the main control board can cause it to misread or fail to receive ice maker cycle signals, generating repeated 39E errors even when the ice maker itself is functional. This is typically diagnosed after ice maker replacement does not resolve the code.
Frequently asked questions about 39E
What does 39E mean on a LG refrigerator?
Can I fix the 39E error myself, or do I need a technician?
Is it safe to use my LG refrigerator while the 39E code is showing?
How much does it cost to fix a 39E error on a LG refrigerator?
Will resetting my LG refrigerator clear the 39E error code?
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass