mypros+
Error code reference

LG Refrigerator Error Code 41E

Ice Room-FAN Error

LG codesLG refrigerator codes

Ice Room-FAN Error — feedback signal line contact error, motor wire separation, or motor error during Ice Room fan operation.

First step from the service manual

Measure voltage between Main PCB CN76-5 and CN76-1; should read between 7.0V and 12V.

The complete diagnostic procedure includes additional test steps, resistance specifications, wiring diagram references, and component test points.

MyPros+ Max

Get the full diagnostic procedure for 41E.

  • Step-by-step tests with expected resistance, voltage, and continuity values
  • Wiring diagram references and connector pinouts from the OEM service manual
  • Verified part numbers when replacement is required
Get the full procedure

$29/month · Cancel anytime · Or $9.95 3-day pass

What 41E means on a LG refrigerator

The 41E error code on an LG refrigerator indicates a fault in the Ice Room fan circuit. This fan is responsible for circulating cold air within the ice maker compartment to maintain proper freezing conditions. The error is triggered when the Main PCB detects an abnormal feedback signal from the Ice Room fan motor, which can point to three distinct failure modes: a contact error on the feedback signal line, physical separation of the motor wiring harness, or an internal motor failure.

To begin diagnosis, a technician should measure the supply voltage at Main PCB connector CN76, specifically between pins CN76-5 and CN76-1. A healthy reading falls between 7.0V and 12V. If voltage is present within this range but the fan is not operating, the motor itself is likely defective. If voltage is absent or out of range, the fault may lie in the PCB output circuit or a wiring harness break between the board and the motor.

Wiring issues are a frequent contributor to this error, particularly in refrigerators with high run hours where connector terminals can develop corrosion or lose tension. A physically separated motor wire may produce an intermittent 41E that appears and clears without any consistent pattern. Inspecting the harness from the PCB connector through to the Ice Room fan motor, including all intermediate connectors, is essential before condemning the motor or the board.

Source: manufacturer service documentation.

Common causes of 41E

  1. 01

    Disconnected or damaged motor wiring

    Wiring / connection

    The wire harness connecting the Ice Room fan motor to the Main PCB can become physically separated or develop a break, cutting off the feedback signal. Inspect the full harness run and all connectors for loose pins, corrosion, or visible wire damage.

  2. 02

    Faulty Ice Room fan motor

    Part replacement

    If supply voltage at CN76-5 to CN76-1 reads within the 7.0V to 12V range but the fan does not spin or the feedback signal is absent, the motor itself has likely failed internally. The motor will need to be replaced.

  3. 03

    Corroded or loose connector at CN76

    Wiring / connection

    The PCB connector CN76 can develop oxidation or loose terminal contact over time, interrupting the voltage supply or feedback signal line. Reseating and inspecting the connector for bent pins or corrosion may resolve the error without further parts.

  4. 04

    Main PCB output failure

    Part replacement

    If voltage at CN76-5 to CN76-1 reads outside the 7.0V to 12V range and the wiring harness checks out as intact, the Main PCB may not be supplying proper power to the fan circuit. Board replacement would be required in this scenario.

See the test procedure for each cause

Frequently asked questions about 41E

What does 41E mean on a LG refrigerator?
The 41E code indicates an Ice Room fan error on your LG refrigerator. It is triggered when the Main PCB detects a problem with the feedback signal from the Ice Room fan motor, which could be caused by a wiring issue, a loose connector, or a failed fan motor. This fan keeps the ice maker compartment cold, so the error can affect ice production. A technician will typically start by checking supply voltage at Main PCB connector CN76.
Can I fix the 41E error on my LG refrigerator myself?
Some causes of the 41E error, such as a loose or disconnected wire harness connector, can be addressed by a confident DIYer with basic electrical knowledge. However, steps like measuring voltage at the Main PCB connector CN76-5 to CN76-1 require a multimeter and comfort working near live circuits. If the motor or Main PCB needs replacement, a qualified appliance technician is recommended for accurate diagnosis and safe repair.
Is the 41E error on an LG refrigerator a safety concern?
The 41E error is not a safety hazard in the traditional sense, as it does not involve a fire or electrical shock risk under normal circumstances. However, a non-functioning Ice Room fan can lead to poor ice production and may stress other components in the ice maker system over time. Addressing the error promptly helps prevent secondary issues.
How much does it cost to repair an LG refrigerator 41E error?
Repair costs vary depending on the root cause. If only a wiring harness or connector repair is needed, costs are typically in the range of $75 to $150 for a service call and labor. If the Ice Room fan motor requires replacement, parts and labor combined generally range from $150 to $300. A Main PCB replacement is the most expensive scenario, often ranging from $250 to $500 or more depending on parts availability and labor rates in your area.
Will resetting my LG refrigerator clear the 41E error code?
A power reset may temporarily clear the 41E code, but it will return if the underlying fault is still present. If the fan motor is failed, a wire is broken, or a connector is loose, the refrigerator will re-detect the problem and log the error again. A reset is useful for confirming whether the fault is intermittent, but it is not a permanent fix and should be followed by proper diagnosis.

Related LG refrigerator codes

All LG refrigerator codes
View all 485 LG refrigerator codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass