mypros+
Error code reference

LG Refrigerator Error Code Od

WiFi PCB and Display PCB connection failure (connect fail or PCB defective).

LG codesLG refrigerator codes

WiFi PCB and Display PCB connection failure (connect fail or PCB defective).

First step from the service manual

Check loose connection at WiFi connector CON104; replace Display PCB if connection is good.

The complete diagnostic procedure includes additional test steps, resistance specifications, wiring diagram references, and component test points.

MyPros+ Max

Get the full diagnostic procedure for Od.

  • Step-by-step tests with expected resistance, voltage, and continuity values
  • Wiring diagram references and connector pinouts from the OEM service manual
  • Verified part numbers when replacement is required
Get the full procedure

$29/month · Cancel anytime · Or $9.95 3-day pass

What Od means on a LG refrigerator

The Od error code on an LG refrigerator indicates a communication failure between the WiFi PCB and the Display PCB. These two boards exchange data continuously to support smart home connectivity features and display functions. When the connection between them is interrupted or cannot be established, the refrigerator logs this fault and displays the Od code to alert the technician or user that the communication link has broken down.

The most common point of failure is the physical connector designated CON104, which is the WiFi connector linking these two boards. A loose, corroded, or improperly seated connector at this location will interrupt the data signal and trigger the error. This type of connection fault is the first thing to inspect because it requires no parts replacement and can be resolved simply by reseating the connector firmly.

If the CON104 connection is confirmed to be secure and the error persists, the fault is attributed to a defective PCB. In this scenario, the Display PCB is the primary suspect and should be replaced. It is also possible that the WiFi PCB itself has failed, but the diagnostic sequence prioritizes the Display PCB based on the nature of the communication fault. Proper diagnosis requires ruling out the connector issue before committing to a board replacement.

Source: manufacturer service documentation.

Common causes of Od

  1. 01

    Loose or disconnected WiFi connector (CON104)

    Wiring / connection

    The connector at location CON104 linking the WiFi PCB to the Display PCB may have come loose or become unseated. Inspecting and firmly reseating this connector is the first and most important diagnostic step.

  2. 02

    Defective Display PCB

    Part replacement

    If the CON104 connection is secure and the Od code remains, the Display PCB is likely faulty. A failed or damaged display board will prevent the communication link from being established regardless of connector condition.

  3. 03

    Corrosion or damage at the connector pins

    Wiring / connection

    Moisture or oxidation on the pins at the CON104 connector can degrade the signal between the two boards even if the connector appears physically seated. Inspecting the pins closely for corrosion or bent contacts is necessary.

  4. 04

    Defective WiFi PCB

    Part replacement

    A failed WiFi PCB can also break the communication link with the Display PCB. This is typically considered after the connector has been checked and the Display PCB has been ruled out or replaced.

See the test procedure for each cause

Frequently asked questions about Od

What does Od mean on a LG refrigerator?
The Od code on an LG refrigerator indicates a communication failure between the WiFi PCB and the Display PCB. The connection between these two boards has either failed or cannot be established. The cause is either a loose connector at the CON104 location or a defective circuit board. A technician should inspect the connector first before considering a board replacement.
How do I fix the Od error on my LG refrigerator?
Start by checking the WiFi connector at location CON104, which links the WiFi PCB to the Display PCB. If the connector is loose, reseat it firmly and check whether the error clears. If the connection is solid and the error persists, the Display PCB will likely need to be replaced by a qualified technician.
Will resetting my LG refrigerator clear the Od error code?
A reset may temporarily clear the Od code, but if the underlying cause is a loose connector or a defective board, the error will return. The connection at CON104 must be physically inspected and secured, or the faulty PCB must be replaced, for the code to stay cleared permanently.
Is the Od error on an LG refrigerator a safety concern?
The Od error relates to the communication between the WiFi and Display boards and does not directly affect the refrigerator's cooling or food preservation functions. However, leaving a board-level fault unaddressed can lead to further electrical issues over time. It is advisable to have the fault diagnosed and resolved in a timely manner.
How much does it cost to repair an Od error on an LG refrigerator?
If the fix is simply reseating the connector at CON104, costs are limited to a service call fee, typically in the range of $75 to $150. If the Display PCB requires replacement, parts and labor combined can range from $200 to $450 depending on the specific model and local labor rates. Getting a diagnostic assessment before authorizing parts replacement is recommended.

Related LG refrigerator codes

All LG refrigerator codes
View all 485 LG refrigerator codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass