LG Washer Error Code LE

LE stands for a water leakage error on LG washers. The machine has detected moisture in the base tray via its leakage sensor, or has identified a fault in a water-carrying component. Possible sources include loose hose connections, an improperly seated drain pump filter cover, incorrect detergent causing foam overflow, a faulty heater seal, or a defective leakage sensor. The washer will stop operation until the issue is identified and corrected.

No, you should not continue running the washer while the LE code is active. An active leak can cause water damage to flooring and cabinetry, and standing water near electrical components creates a potential shock hazard. Leave the washer unplugged and the water supply turned off until the source of the leak has been identified and repaired.

Repair costs vary widely depending on the root cause. If the issue is simply excess detergent or a loose hose, there may be no cost at all. Part replacements such as a new leakage sensor or drain pump components typically range from $20 to $80 for the parts alone. If the tub back is cracked or major structural components are involved, total repair costs including labor can range from $150 to $350 or more, at which point comparing the repair cost to replacement value is worth considering.

Several of the most common causes of the LE code are DIY-friendly. Checking for excess detergent use, reseating the drain pump filter cover, inspecting hose connections, and verifying the detergent drawer hose is properly connected are all tasks a homeowner can perform safely. More complex repairs, such as replacing a faulty leakage sensor, reseating a heater element, or addressing a cracked tub back, typically require a qualified technician with the proper tools and parts.

A reset may temporarily clear the code and allow the machine to restart, but if the underlying cause of the leak or sensor fault has not been addressed, the LE code will return during the next wash cycle. Resetting is a useful first step only after you have already inspected and corrected the most likely causes, such as reseating a loose cover or reducing detergent. A reset alone is not a fix.