Skip to main content
Error code reference
Magic Chef Oven Error Codes
35 error codes documented with diagnostic procedures.
Have your model number? Get codes specific to your unit.
CLrNo fault detected; indicates normal operation with no error codes stored.F0Default F codeF01Oven sensor error-the oven temperature sensor/probe has failed or its circuit is faulty.F02Temperature error-a heating element insulation failure or runaway temperature condition.F03Appliance Manager (AM) configuration error-the manual configuration procedure was not…F05Door or latch problems (fault detected in door latch assembly, switches, or motor).F06Electronic control malfunction.F07EEPROM error-the non-volatile memory on the Appliance Manager has failed.F1Electronic control malfunction (all E codes under F1).F1 E2UL A/D errors.F1 E4Model ID error.F1-E0Electronic control malfunctionF1-E1Electronic control malfunctionF1-E5Electronic control malfunctionF1-E6Electronic control malfunction (all E codes under F1 indicate electronic control…F11Home power supply error-incoming voltage to the oven is out of specification.F2Shorted key (keypad short circuit).F2-E0Temperature sensor opened (R=2875 ohms by spec).F2-E1Temperature sensor shorted (R=825 ohms by spec).F2-E2Oven temperature too highF2-E3Oven temperature too highF2-E5CANCEL key drive line open.F2-E6CANCEL key drive line open.F3Oven sensor open circuit, oven sensor short circuit, BAKE/BROIL excessive temperature, or…F3 E4Bottom oven sensor open.F3 E5Bottom oven sensor shorted.F3-E0Door is open but latch is locked (door switch indicates open door while latch switch…F3-E1Temperature sensor shorted (R=825 ohms by spec).F3-E2Oven temp too highF3-E3Oven temp too highF5Door and latch switch mismatch during clean mode.F5-E0Door is open but latch is locked (door switch closed indicating open door, and latch…F5-E1Self-clean latch will not lock or will not unlock.F6-E0Return line not connectedF8 E0Refrigeration incorrect operation.
Get the full diagnostic procedure for any code
Step-by-step tests, expected values, wiring diagram references, and verified part numbers.
Get Started $9.95 3-day pass$29/month for all brands and Max diagnostics, with 70 Max messages a day. Plus applicable tax.