Miele Refrigerator Error Code 1-1-1

Error code 1-1-1 means the icemaker's ice production cycle was interrupted before it could complete. The icemaker goes through a sequence of filling, freezing, and rotating the tray to harvest ice, and something stopped that process. The refrigerator logs this code and suspends ice production until the underlying issue is resolved.

A reset may temporarily clear the error code from the display, but the code will return if the underlying cause is not corrected. The icemaker will attempt another production cycle after a reset, and if the same interruption occurs, error 1-1-1 will be logged again. Resolving the mechanical or component issue is necessary for a permanent fix.

If the fix is simply clearing a blockage, there may be no parts cost at all, only a service call fee if a technician is involved. If the icemaker assembly requires replacement, parts and labor costs on a Miele unit typically range from $200 to $500 or more depending on the specific model and local labor rates. Getting a diagnosis first will clarify whether a simple fix or a full icemaker replacement is needed.

Start by running the icemaker self-test to see if the ice tray rotates. If it does not rotate, check the tray cavity for any ice chunks or objects blocking the mechanism and clear them. If no blockage is found and the tray still will not move, the icemaker assembly likely needs to be replaced. If the tray does rotate during the self-test, inspect the water supply line for restrictions or freezing.

This error is specific to the icemaker and does not affect the refrigerator or freezer compartments, so food safety is not at risk. The refrigerator will continue cooling normally while the icemaker is disabled. There is no immediate safety hazard, but the issue should be diagnosed to restore ice production and prevent any related water supply concerns.