Prodigy Ice Maker Error Code H flashes

The flashing H on a Prodigy ice maker indicates that a manual harvest cycle has been initiated. This is an operator-triggered function, not a fault code. The machine is in the process of releasing ice from the evaporator ahead of its normal automated schedule. It will return to standard freeze operation once the harvest cycle completes.

No, the flashing H is not a safety warning. It simply indicates the machine is performing a harvest cycle on demand. Make sure the ice drop zone or bin is clear before and during the harvest, but otherwise no safety action is required.

A power reset is generally not necessary to clear the flashing H, as the indicator will stop once the harvest cycle completes normally. If the machine appears stuck in harvest mode and is not advancing, a power reset may interrupt the cycle, but the underlying cause of the stall should still be diagnosed before returning the unit to service.

In most cases, no fix is required. The flashing H will stop on its own once the manual harvest cycle finishes and the machine transitions back to the freeze phase. If the indicator continues flashing for an unusually long time without ice being harvested, inspect the hot gas valve and control board for proper operation.

Because the flashing H typically indicates a normal manual harvest function rather than a failure, there is often no repair cost involved. If an underlying component issue such as a faulty hot gas valve or control board is found to be causing a prolonged or repeated H indication, repair costs could range from around 80 to 300 dollars or more depending on the specific part and labor involved.