Skip to main contentGet Started
Error code reference
Samsung Dryer Error Code 0
Vent condition is good (vent blockage test result).
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
What the 0 error code actually means
A result of 0 on your Samsung dryer's vent test is actually good news. It means your dryer checked its exhaust vent and found that air is flowing freely with no significant blockage detected. No repair is needed based on this result.
Diagnostic procedure
The full 0 procedure
Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.
MyPros+ · DiagnosticsStep 1 preview
1
Confirm the fault
Power cycle the unit: switch off the breaker for 60 seconds, then restore power. If the code returns, the fault is persistent and the procedure below isolates the cause.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock 0 procedure $9.95
Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.
Most common causes of 0
Ranked by how often they cause this code
- 1Routine diagnostic test completion
- 2Technician-initiated vent test
- 3Recent vent cleaning restoring normal airflow
- 4Lint screen was clean during the test
Most DIYers save hundreds by diagnosing before ordering parts.
Get Started
$29/month · Cancel anytime · Or $9.95 3-day pass
Questions people ask about 0
What does 0 mean on a Samsung dryer?
A result of 0 on a Samsung dryer refers to the outcome of the built-in vent blockage diagnostic test. It is a passing result, indicating that the exhaust vent system has no significant airflow restriction at the time the test was run. This is not an error code and does not indicate a problem with the dryer.
Is it safe to use my Samsung dryer after seeing a 0 vent test result?
Yes, it is safe to use the dryer. A 0 result means the vent system passed its diagnostic check and airflow is not restricted. Normal dryer operation can continue without concern based on this result.
What does a vent blockage test cost to have performed on a Samsung dryer?
If a technician runs this test during a service call, the cost is typically bundled into the standard diagnostic or service call fee, which generally ranges from $75 to $150 depending on location and provider. Since a 0 result indicates no blockage, no additional parts or repair labor should be needed beyond the initial visit.
Do I need to fix anything if I see a 0 result on my Samsung dryer?
No repair is needed when a 0 is returned from the vent blockage test. The result means the dryer's exhaust path is clear and performing acceptably. Continue with regular lint screen cleaning and periodic duct inspection to maintain this condition.
Will resetting my Samsung dryer clear the 0 result from the display?
The 0 result typically clears on its own once the diagnostic mode is exited or the dryer returns to standby mode. A power cycle, done by unplugging the dryer for about 60 seconds and reconnecting, can also clear any residual codes from the display.
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass