mypros+
Error code reference

Samsung Microwave Error Code E-0X

Other error codes (device-specific, format

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the E-0X error code actually means

Your Samsung microwave has detected a problem with one of its internal sensors or its memory chip. The specific letters and numbers shown after the E tell a technician exactly which part is having trouble and what kind of problem it is. Try turning the microwave off, waiting a moment, and turning it back on to see if the error clears.

Diagnostic procedure

The full E-0X procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Turn off set and restart.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock E-0X procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of E-0X

Ranked by how often they cause this code
  1. 1Faulty or failed temperature sensor
  2. 2Loose or corroded sensor connector
  3. 3Damaged wiring harness
  4. 4Failed gas sensor or weight sensor
  5. 5EEPROM failure or corruption

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about E-0X

What does E-0X mean on a Samsung microwave?
E-0X is a device-specific error code that uses a combination of a device number and an error case number to identify a fault in a particular sensor or the EEPROM memory chip. The sensors that can trigger this code include the temperature sensor, gas sensor, weight sensor, and Easy/PH sensor. The specific digits shown on your display indicate exactly which component is affected and whether the fault is an open circuit, short circuit, or memory error. Reading the full code carefully is essential before beginning diagnosis.
Is it safe to use my Samsung microwave while the E-0X code is displayed?
It is generally not advisable to continue using the microwave while a sensor or EEPROM fault code is active. A malfunctioning temperature or gas sensor could affect the unit's ability to regulate cooking functions correctly. Powering off the unit and having it inspected before further use is the safer course of action.
How much does it cost to repair an E-0X error on a Samsung microwave?
Repair costs vary depending on which component has failed. A replacement sensor typically costs in the range of $15 to $60 for the part, while a control board replacement due to EEPROM failure can run $80 to $200 or more for the part alone. Professional labor charges will add to these estimates, generally ranging from $50 to $150 depending on the service provider and location.
Will resetting my Samsung microwave clear the E-0X error?
Turning the microwave off and restarting it is the recommended first step and can clear the code if the fault was caused by a temporary power fluctuation or sensor noise. If the error returns after the restart, the underlying component fault is still present and will need to be diagnosed and repaired. A reset alone will not fix a failed sensor, damaged wiring, or a corrupted EEPROM.
How do I fix the E-0X error on my Samsung microwave?
Start by turning the microwave off and restarting it to check if the fault clears. If the code returns, note the full code displayed, as the specific digits identify which sensor or subsystem is involved. Inspect the wiring connectors for that component for looseness or corrosion, and reseat them if needed. If the sensor or EEPROM itself has failed, the affected component will need to be replaced.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass