mypros+
Error code reference

Samsung Microwave Error Code E-25

Abnormal temperature sensed during microwave cook mode

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the E-25 error code actually means

Your Samsung microwave detected that the inside of the oven was too hot, over 200 degrees, before it even started cooking. This is a safety feature that stops the microwave from running when it is already overheated. Try pressing Cancel, letting it cool down for 20 to 30 minutes, and starting it again.

Diagnostic procedure

The full E-25 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Press Cancel key; allow oven to cool down and restart.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock E-25 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of E-25

Ranked by how often they cause this code
  1. 1Residual heat from previous use
  2. 2Faulty internal temperature sensor
  3. 3Damaged or shorted sensor wiring harness
  4. 4Control board fault
  5. 5Inadequate ventilation around the unit

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about E-25

What does E-25 mean on a Samsung microwave?
E-25 means the microwave detected an internal cavity temperature above 200 degrees Fahrenheit at the start of a cook cycle. This is a safety protection feature that prevents the oven from operating while overheated. The error can be caused by genuine overheating from recent use or by a faulty temperature sensor reporting incorrect values. Pressing Cancel and allowing the unit to cool down is the recommended first step.
Is it safe to use my Samsung microwave while it shows E-25?
No, you should not attempt to force the microwave to operate while displaying E-25. The error is an active safety protection indicating the unit is too hot to run safely or that a sensor fault is present. Continuing to operate it in either condition could cause component damage or a fire risk. Allow it to cool and reassess before using it again.
How much does it cost to repair a Samsung microwave with an E-25 error?
If the fix is simply allowing the unit to cool down, there is no cost involved. Replacing an internal temperature sensor typically costs between 15 and 60 dollars for the part, plus labor if a technician is hired. A control board replacement is significantly more expensive, generally ranging from 80 to 200 dollars or more for the part alone, and may approach or exceed the value of an older unit.
Will resetting the microwave clear the E-25 error?
Pressing the Cancel key and allowing the oven to cool down for 20 to 30 minutes will clear E-25 if the cause is genuine residual heat from a previous cook cycle. If the error returns immediately after a full cool-down, the fault is likely a defective temperature sensor or wiring issue and a reset alone will not resolve it. In that case, component-level diagnosis is required.
How do I fix the E-25 error on a Samsung microwave?
Start by pressing Cancel and letting the microwave cool in a well-ventilated area for at least 20 to 30 minutes, then attempt to restart. If the error clears and does not return, overheating from prior use was the likely cause. If E-25 comes back after cooling, the internal temperature sensor or its wiring harness should be inspected and tested, and the sensor replaced if it is reading out of range. A control board fault is also possible if the sensor checks out correctly.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass