Whirlpool Washer Error Code 215

Error code 215 on a Whirlpool washer means the blower motor inverter board has reported a fault. The inverter board is responsible for converting line voltage to power the blower motor. The code is triggered when the board detects an abnormal condition, which can be caused by incorrect supply voltage, an internal board failure, wiring problems, or a faulty blower motor.

You should not continue running the washer while error code 215 is active. A fault in the blower motor inverter circuit can indicate an electrical problem that could worsen with continued operation. Disconnect the washer from power and have the fault diagnosed before resuming use.

A power reset may temporarily clear error code 215, but if the underlying fault condition still exists, the code will return when the washer attempts to operate. Resetting the machine without addressing the cause is not a reliable fix. The inverter board fault needs to be diagnosed and repaired for the error to be permanently resolved.

Some causes of error code 215 can be addressed without replacing parts, such as correcting a loose connection at connector CN8 or resolving a household voltage supply issue. However, diagnosing this fault requires a multimeter and the ability to safely measure live AC voltages, which carries serious electrical hazard risk. If the inverter board itself has failed, replacement of that board is required, and most homeowners will want to have a qualified technician handle the repair.

Repair costs depend on the root cause. If the fix involves tightening a connector or addressing a power supply issue, costs may be limited to a service call fee, typically in the range of $75 to $150. If the blower motor inverter board needs replacement, parts and labor combined can range from $200 to $450 or more depending on your location and the specific model.