mypros+
Error code reference

Whirlpool Washer Error Code 67

Drive Motor Inverter Fault

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the 67 error code actually means

Your Whirlpool washer is displaying error code 67 because a component called the motor inverter board has detected a problem with how power is being delivered to the wash motor. Think of the inverter board as the translator between your washer's electronics and the motor that spins the drum. This error means the washer has stopped operating because it detected something wrong in that power delivery system, which could be the board itself, the motor, or the wiring connecting them.

Diagnostic procedure

The full 67 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Perform service mode test 11 - Spin Test to full completion.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock 67 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of 67

Ranked by how often they cause this code
  1. 1Faulty Drive Motor Inverter Board
  2. 2Drive Motor Failure
  3. 3Damaged Wiring or Connector Between Inverter and Motor
  4. 4Mechanical Overload on the Drive System
  5. 5Main Control Board Communication Fault

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about 67

What does 67 mean on a Whirlpool washer?
Error code 67 on a Whirlpool washer means the drive motor inverter board has reported a fault. The inverter board controls power delivery to the drive motor, and this code indicates it has detected an abnormal condition such as an overcurrent event, overheating, or an internal failure. The washer will stop operating until the fault is diagnosed and resolved. The first recommended diagnostic step is running service mode test 11, the Spin Test, to its full completion.
Is it safe to keep using my Whirlpool washer with error code 67?
It is not recommended to continue operating the washer while error code 67 is active. The fault indicates a problem in the motor drive system, and running the washer in this condition could worsen damage to the inverter board, drive motor, or wiring. The washer will typically stop operation on its own when this fault is detected, which is a protective response.
Will resetting my Whirlpool washer clear error code 67?
A power reset may temporarily clear error code 67 from the display, but it will not fix the underlying problem causing the fault. If the inverter board, drive motor, or wiring has a genuine fault, the error code will return as soon as the washer attempts to operate the drive motor again. A proper diagnosis using service mode test 11 is necessary to identify and resolve the root cause.
Can I fix error code 67 on my Whirlpool washer myself?
Some causes of error code 67 can be addressed without professional help, such as clearing a mechanical obstruction from the drum or checking and reseating wiring connectors. However, diagnosing the root cause properly requires running the service mode test 11 Spin Test, which involves accessing diagnostic modes. Replacing the inverter board or drive motor requires comfort with appliance disassembly and working around electrical components, so many homeowners prefer to have a technician handle those repairs.
How much does it cost to repair error code 67 on a Whirlpool washer?
Repair costs vary depending on the failed component. A replacement drive motor inverter board typically costs in the range of $100 to $250 for the part alone. A drive motor replacement can range from $150 to $350 or more for the part. Adding professional labor, total repair costs generally fall between $200 and $500 depending on the specific failure and your location.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass