mypros+
Error code reference

Wolf Range Error Code 1122

Right convection element drive relay is open when it should be closed (left oven).

Wolf codesWolf range codes
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the 1122 error code actually means

Your Wolf range has detected a problem with the relay that controls one of the convection heating elements in the left oven. The oven's control system sent a signal to turn on that element, but the component responsible for making the connection did not respond as expected. The oven has stopped working normally to prevent any further issues, and a repair technician will need to replace an internal circuit board to fix it.

Diagnostic procedure

The full 1122 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Replace oven relay board.
Unlock with pass
Unlock with pass
Unlock with pass
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock 1122 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of 1122

Ranked by how often they cause this code
  1. 1Failed oven relay board
  2. 2Burned or corroded relay contacts
  3. 3Loose or damaged wiring harness connection
  4. 4Shorted or failed convection element
  5. 5Control board communication fault

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about 1122

What does 1122 mean on a Wolf range?
Error code 1122 means the right convection element drive relay in the left oven is open when the control system expects it to be closed. This tells the control system that the relay responsible for powering the right convection element is not making the connection it should. Wolf's diagnostic guidance points to the oven relay board as the component to replace in order to resolve this fault.
Is it safe to use my Wolf range while error 1122 is displayed?
When error 1122 is active, the left oven's convection function will not operate correctly, and continued use is not recommended. The fault indicates a relay failure in the power circuit for the convection element, and running the oven in this state could cause additional stress on related components. It is best to discontinue use of the affected oven cavity until the relay board has been inspected and replaced.
How much does it cost to repair Wolf range error code 1122?
The cost to repair error 1122 depends on parts and labor rates in your area. Oven relay boards for Wolf ranges typically fall in the range of $150 to $400 or more depending on the specific model. Adding professional labor, total repair costs commonly range from $250 to $600 or higher. Getting a quote from a Wolf-authorized service technician will provide the most accurate estimate for your specific unit.
Can I fix error code 1122 on my Wolf range myself?
Resolving error 1122 typically requires replacing the oven relay board, which involves accessing internal components and working near high-voltage circuits. Technicians comfortable with appliance disassembly can inspect the wiring harness and element for obvious faults first. However, relay board replacement is generally best handled by a qualified appliance repair technician due to the voltages involved.
Will resetting my Wolf range clear error code 1122?
Resetting the range by disconnecting power briefly may temporarily clear the error display, but the underlying relay fault will cause the code to return as soon as the oven attempts to activate the right convection element again. A reset does not repair a failed relay or relay board, so the error will persist until the faulty component is replaced.

Related Wolf range error codes

All Wolf range codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass