mypros+
Model reference

Amana 150A-2N

Air Conditioner

60 error codes12 service modes
MyPros+ Max

Diagnose your Amana 150A-2N.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (60)

CodeMeaning
F0Default F codeF0-0No fault present.F03One or more keys permanently pressed on the touch control surface.F1Electronic control malfunction (all E codes).F1-1Runaway cook condition in upper oven.F1-2Runaway cook condition in lower oven.F1-3Runaway clean condition in upper oven (temperature above 650°F).F1-4Runaway clean condition in lower oven (temperature above 650°F).F1-5Cancel keypad failure for upper oven.F1-6Cancel keypad failure for lower oven.F1-7Keypad disconnected.F1-8Keypad shorted.F1-9Slave communication fault.F1-AUpper oven latch switch fault.F1-BLower oven latch switch fault.F1-CUpper oven door open fault.F1-DLower oven door open fault.F1-EEEPROM fault.F1-E0Key held down too long, or key is shorted.F1-E1Keypad keytail not connected.F1-E5Cancel key drive line open.F1-FJumper fault.F1-HEEPROM read error.F1-LSensor wire fault (open path).F12Electronic board and touch module communication error.F13Internal CPU checksum errors.F2Electronic control malfunction.F2 E0Key held down too long, or key is shorted.F2 E1Keypad keytail not connected.F2 E5Cancel key drive line open.
View all 60 error codes
F22Key sensitivity problem.F3 E0Temperature sensor opened.F3 E1Temperature sensor shorted.F3 E2Oven temperature too high (over 301°C / 575°F in Cook mode).F3 E3Oven temperature too high (over 510°C / 950°F in Clean mode).F3-1Upper oven sensor fault.F3-2Lower oven sensor fault.F3-E0Temperature sensor opened.F3-E1Temperature sensor shorted.F3-E2Oven temp too high (over 301°C [575°F] in Cook mode).F3-E3Oven temp too high (over 510°C [950°F] in Clean mode).F36Temperature probe hardware error.F4 E1Meat probe malfunctionF4-E1Meat probe malfunctionF5 E0Door is open but latch is locked (door switch closed indicating open door, and…F5 E1Self-clean latch will not lock.F5 E5Self-clean temperature (288°C / 550°F) not reached within 45 minutes.F5 E7Self-clean latch will not unlock.F5-E0Door is open, but latch is locked (door switch closed indicating open door, and…F5-E1Self clean latch will not lock.F5-E5Self clean temperature (288°C [550°F]) not reached within 45 minutes.F5-E7Self clean latch will not unlock.F6 E0Return line not connected; electronic control will display F6 within 60 seconds…F6-E0Return line not connected.F9-1Upper oven latch switch error.F9-2Upper oven unlock switch error.F9-3Upper oven lock and unlock switch error.F9-4Lower oven lock switch error.F9-5Lower oven unlock switch error.F9-6Lower oven lock and unlock switch error.

Service modes (12)

  • Control LockoutPress Setup and then 4
  • Demo ModePress Bake and Cancel keys for 3 seconds.
  • Electronic Control Board Circuit MonitoringNo manual entry required
  • Engineering ModePress the Bake Key of either oven, enter a bake temperature of 100°F, then hold Bake down for 3…
  • Fahrenheit to Celsius conversionPress the BROIL pad for 5 seconds
  • Fault Code Diagnosis ModeThe cooktop automatically enters failure mode when a fault is detected
  • Fault code history recallPress and hold the '0' touchpad for 5 seconds to access the previous fault codes
  • Oven Temperature AdjustPress Bake in either upper or lower oven, enter a temperature of 550°F, then hold Bake key for 3…
  • Programming Cavity SizeWithin 60 seconds of power up, press
  • Programming the cavity sizeWithin 60 seconds of power up, press the following touchpads in order
  • Sabbath Mode exitIf 'SAB' appears in the display, press and hold the '6' touchpad for 5 seconds to end Sabbath Mode.
  • Test ModeHold Cancel and Broil keys down for 3 seconds within 5 minutes of power up

Full entry steps, exit procedures, and test sequences are available in Max.

Related Amana air conditioner models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass