mypros+
Model reference

Amana GH-80DE-3/P96294-6F

Furnace

5 documents13 error codes17 service modes

Available documentation

Service Manual

  • Service Manual - W10670270A76 pg
    Covers this model

Service Flash

  • UD-41 Update Book Service Update First Half 201168 pg
    Covers this model

Installation Guide

  • Installation Instructions32 pg
    Covers this model
  • Installation Instructions5 pg
    Covers this model
  • Installation Instructions32 pg
    Covers this model
MyPros+ Max

Diagnose your Amana GH-80DE-3/P96294-6F.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (13)

CodeMeaning
:Steady colon indicates a power failure has occurred.Err7Key errorF1E1No voltage detected at the heater relay; possible motor or heater failure or…F2Touch panel failure.F3E1Exhaust thermistor is open or shorted (open if temp drops below 18°F / >50k…F3E2Moisture sensor strip 1 is open or shorted (only appears in service diagnostic…F3E3Inlet thermistor is open or shorted (open if temp drops below 18°F / >245k…F3E5Second moisture sensor strip is open or shorted (Quad Sense models only; only…F6MW relay failure (Relay 4903 on PCBA); relay contact may have welded closed.F6E1ACU and HMI have not communicated for a specified amount of time.F6E2WiFi Module has not responded for a specified amount of time.FCE1WiFi Module communications lost.PFPower failure indication; blinks in the display after a power outage longer…

Service modes (17)

  • Automatic Function TestWith door latched, press key pads in the following sequence within 10 seconds
  • automatic_diagnostic["Turn the product on.","Within 20 seconds of Power On, press and hold the Clean button first, then…
  • clean_mode["Press ON/OFF button to stop ice production.","Wait 10 minutes for ice to fall into storage bin
  • Component Activation / Quick Service Cycle (LCD in Door Models)["Enter Service Diagnostic Mode (LCD in Door) first.","From the DIAGNOSTICS HOME screen, scroll…
  • diagnostic1
  • Key Activation & Encoder Test (Console Models)["Activate Service Diagnostic Mode first.","Press and release the 1st button used to activate…
  • Manual Function TestWith door latched, press key pads in the following sequence within 10 seconds
  • manual_diagnostic["Turn the product on.","Within 20 seconds of Power On, press and hold the Clean button first, then…
  • Self-Diagnostic / Test Mode["1
  • Self-Diagnostic Test Mode["1
  • Service Diagnostic Mode (Console Models)["Ensure the dryer is in standby mode (plugged in with all indicators off).","Select any three (3)…
  • Service Diagnostic Mode (LCD in Door Models)["Ensure the dryer is in standby mode (plugged in with all indicators off).","Open and close the…
  • Service Mode Diagnostics["Make sure that the unit is not in the 'lockout' mode (the lockout LED will be off).","Press and…
  • Service Test Mode (Console Models)["Activate Service Diagnostic Mode first.","Press and release the 2nd button used to activate…
  • Showroom Floor ModeReferenced as a feature of the Fast Fill Dispenser System but no entry procedure is detailed in…
  • Software Version Display (Console Models)["Activate Service Diagnostic Mode first.","Press and hold the 2nd button used to activate Service…
  • Touch Panel and PCBA Self-Diagnostic Test Mode["Press and hold the CANCEL/OFF button while opening the door.","While still holding the CANCEL/OFF…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Amana furnace models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass