Model reference
Amana RB241001
Range
1 document10 error codes1 service mode
Available documentation
Service Manual
- Service Manual - Electric Ranges99 pg
MyPros+ Max
Diagnose your Amana RB241001.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (10)
CodeMeaning
DOORIn bake/broil mode indicates a defective latch switch, a shorted wire lead from…F1Indicates a failed component in the ERC (ERC with Attached P.CF2Excessive oven temperature, or sensor resistance too high (ERC III).F3Open wire lead in sensor harness, bad harness/sensor connection, or sensor…F4A short circuit in the sensor wire harness or sensor resistance too low (ERC…F5A failed component in the ERC (ERC III).F6Indicates a failed component in the ERC or due to fluctuations in 60 Hz power…F7Indicates a shorted or sticking contact in one or more of the function control…F8Indicates a failed component in the ERC.LOCKWhen displayed and oven is not in clean mode, the oven sensor resistance is too…Service modes (1)
- Display Test / Sales Demonstration Mode (ERC with Attached P.C. Board)["Clock must previously be set to time of day.","Press and hold CLOCK button until TIME is…
Full entry steps, exit procedures, and test sequences are available in Max.
Related Amana range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass