mypros+
Model reference

Amana TC18W-P60303-11W

Refrigerator

3 documents32 error codes6 service modes

Available documentation

Tech Tip

  • Instruction Sheet - 818450620 pg
    Covers this model
  • Instruction Sheet16 pg
    Covers this model

Other

  • KitchenAid Refrigerator KFCS22EVMS6 Technical Sheet W104480512 pg
    Covers this model
MyPros+ Max

Diagnose your Amana TC18W-P60303-11W.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (32)

CodeMeaning
:Power failure indication; the colon flashes on the display after a power…1-1Control detected K2 pilot relay stuck closed.1-2Damaged or corrupted memory or control board, incompatible software components…10-1Dispenser electrical problem10-3Drying fan error2-1Control detected stuck key(s) in keypad or keypad connection.2-2User interface cannot communicate with main control3-1Open connector or component in Temperature Sensing circuit; open or faulty…3-2Incoming water temperature above 167°F (75°C), or shorted connection or…3-3OWI (optical soil sensor) calibration failure.4-3Wash motor not running due to loose connection in Motor circuit and/or faulty…5-1Door stuck open5-2Door stuck closed6-1Inlet water low/no water (mechanical problem)6-2Inlet water fill valve electrical problem6-3Suds/air in pump6-4Float switch open6-6Incoming water cool6-8Regen valve electrical problem7-1No heat7-1 (flowmeter)Disconnected or damaged flowmeter.7-2Heater stuck on8-1Slow drain8-2Drain motor electrical problem8-3Drain motor stuck on8-5Drain stuck on9-1Diverter can't find position9-2Diverter stuck on9-3Diverter disk missingF2Membrane switch failure.
View all 32 error codes
F3HHumidity sensor failure.F6Microwave relay failure.

Service modes (6)

  • Clear Customer Error HistoryDuring Service Diagnostics Cycle interval where Hi Temp LED is on (interval 22), press Hi Temp key…
  • Customer Cycle Rapid AdvanceAfter starting a customer cycle, press HIGH TEMP
  • Rapid Advance Mode (Customer Cycles)After starting a customer cycle, press HIGH TEMP
  • Service Diagnostics Cycle1
  • Touch Panel and Electronic Control Self-Diagnostic Test Mode["Press and hold the OFF/CANCEL button while opening the door.","While still holding the OFF/CANCEL…
  • Touch Panel and Microcomputer Board Self-Diagnostic Test["Depress the CANCEL button while opening the door.","While still depressing the CANCEL button…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Amana refrigerator models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass