mypros+
Model reference

Bosch SHU66C07UC/14

Dishwasher

3 documents22 error codes8 service modes

Available documentation

Service Manual

  • Dw Repair Instruction42 pg
    Covers this model
  • Bosch Dishwashers144 pg
    Covers this model

Training

  • Bosch Dishwashers144 pg
    Covers this model
MyPros+ Max

Diagnose your Bosch SHU66C07UC/14.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (22)

CodeMeaning
#AApexx display#BApexx display#EApexx display#FApexx display#GApexx display#HApexx display#KApexx display0No faults detected during test program.1Control module has timed out due to an unidentified heating problem; all…16Water switch fault.2Heating system fault (heater, Hi-Limit, flow switch, NTC, or control module…2HLast wash cycle too long (>99 minutes); can be cold inlet water or heating…4Water filling fault.8NTC (temperature sensor) fault.E0No errors stored.E1Heating error.E2NTC (temperature sensor) error.E3Filling error (water fill problem).E4Water switch cannot be positioned.E5Safety float water level reached or motor speed error (error code dependent on…E6Aqua sensor error.FWater filling fault (underfill, overfill, or water in the base)

Service modes (8)

  • Customer service test program (P1)["While pushing and holding any two wash cycle buttons, turn the dishwasher on with the on/off…
  • End of Cycle Tone Disable (SHU99/SHV43/48 with #481055 module)1. Open door. 2. Push and hold Delicate/Econo button. 3. Turn dishwasher on while holding…
  • End of cycle tone volume setting["Turn the dishwasher off.","Push and hold the right Cancel Reset button while turning the…
  • Extra dry heat setting["Turn the dishwasher off.","Push and hold the left Cancel Reset button while turning the…
  • Sales demo mode (C9)["Enter the special programs menu (hold two wash cycle buttons while turning on).","Push button 'B'…
  • Special programs and coding menu["While pushing and holding any two wash cycle buttons, turn the dishwasher on with the on/off…
  • Test Program (Apexx SHV/SHX/SHY99 full-text display models)1
  • Test Program (standard 2-digit display models)1. Hold down the two designated buttons for your model (2nd and 4th from left

Full entry steps, exit procedures, and test sequences are available in Max.

Related Bosch dishwasher models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass