mypros+
Model reference

Bosch IK302254

Refrigerator

1 document43 error codes5 service modes

Available documentation

Service Manual

  • Refrigerating / Freezing Product Division Service Documentation199 pg
    Covers this model
MyPros+ Max

Diagnose your Bosch IK302254.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (43)

CodeMeaning
F1Compartment sensor in the refrigerator compartment is interrupted (open…F11Compartment sensor in the freezer compartment is interrupted (open circuit).F12Compartment sensor in the freezer compartment is short-circuited.F13Evaporator sensor in the freezer compartment is interrupted (open circuit).F14Evaporator sensor in the freezer compartment is short-circuited.F15Defrosting phase in the freezer compartment was unsuccessful twice in…F16Evaporator temperature in the freezer compartment did not drop by 1K within 5…F2Compartment sensor in the refrigerator compartment is short-circuited.F21Compartment sensor in the cool-fresh compartment is interrupted (open circuit).F22Compartment sensor in the cool-fresh compartment is short-circuited.F23The set required temperature in the cool-fresh compartment has not been reached…F24Temperature in the cool-fresh compartment was colder than -2°C for 15 minutes.F3Evaporator sensor in the refrigerator compartment is interrupted (open circuit).F31Ice rod sensor is interrupted (open circuit).F32Ice rod sensor is short-circuited.F33Compartment sensor in the ice maker is interrupted (open circuit).F34Compartment sensor in the ice maker is short-circuited.F35Temperature in the ice maker has been colder than 0°C for 2 hours.F37Limit switch at bottom is switched on while the water bowl is being swung up…F39Limit switch at top is switched on while the water bowl is being swung down…F4Evaporator sensor in the refrigerator compartment is short-circuited.F40In the descaling programme the temperature on the ice rod has not risen above…F41Temperature on the ice rod is rising above 1°C during the ice making process…F43Required water height in the water bowl was not reached after a water inlet…F44Temperature on the ice rod remains above 0°C for 1 hour during the ice making…F45Duration of ice production exceeded 3 hours.F46Temperature on the ice rod does not rise above 5°C after 1 hour during the…F47Temperature on the ice rod is warmer than 49°C.F5The set required temperature in the refrigerator compartment was not reached…F50Waste water alarm
View all 43 error codes

Service modes (5)

  • Component Test ProgrammeWithin the first 7 seconds after switching on the appliance, simultaneously press the designated…
  • Descaling ProgrammeHold down the designated two buttons for 5 seconds.
  • Long-Term Diagnosis ProgrammeDuring normal closed-loop control, simultaneously press the designated buttons.
  • Self-Diagnosis ProgrammeWithin the first 7 seconds after switching on the appliance, simultaneously press the designated…
  • Service ProgrammeSimultaneously press the designated buttons (specific button labels not legible from document)…

Full entry steps, exit procedures, and test sequences are available in Max.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass