Model reference
GE ZBD7005G03II
Dishwasher
3 documents10 error codes19 service modes
Available documentation
Service Manual
- TECHNICAL SERVICE GUIDE Monogram Dishwasher69 pg
Bulletin
- Lights Blinking – Cycle does not complete1 pg
Training
- TECHNICAL SERVICE GUIDE Monogram Dishwasher69 pg
MyPros+ Max
Diagnose your GE ZBD7005G03II.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (10)
CodeMeaning
Door ThermistorOpen circuit door thermistor (temperature sensed below 32°F) or short circuit…Not DrainingController has not sensed that the machine is empty after 5 minutes of draining.Not FillingPressure switch has not sensed water present after the selected fill time plus…Not HeatingWater temperature has not risen by greater than 9°F in 15 minutes during a…Over TemperatureWater temperature sensed exceeds 180°F but is less than 210°F.OverfillLeak detection switch closed or 2nd level pressure switch activated indicating…Turbidity Sensor High SignalTurbidity sensor count is greater than 65,279 in 0.4 seconds.Turbidity Sensor Low SignalTurbidity sensor count is less than 50 in 3 seconds.Turbidity Sensor No SignalTurbidity sensor counter did not receive pulses from sensor.Turbidity Temp SensorTurbidity temperature sensor thermistor is shorted, open, or reading constant.Service modes (19)
- Buzzer Silencing ModePress START/CANCEL and NORMAL WASH (or POTS NORMAL on 6905) buttons together.
- Child Lockout ModePress and hold POTS & PANS (or POTS HEAVY on 6905) and START/CANCEL buttons together for 2 seconds…
- Fault Indication Mode (6400/6500)Press buttons in sequence
- Fault Indication Mode (6600/6605 Rotary)1
- Fault Indication Mode (6700/6900)Press buttons in sequence
- Fault Indication Mode (6905)Press buttons in sequence
- Fault Indication Mode (7000 Series)Press buttons in sequence
- Field Test Cycle (6400/6500)Press buttons in sequence
- Field Test Cycle (6600/6605 Rotary)1
- Field Test Cycle (6700/6900)Press buttons in sequence
- Field Test Cycle (6905)Press buttons in sequence
- Field Test Cycle (7000 Series)Press buttons in sequence
- Fill Level Adjustment1
- Relay/Triac Output Test - Latching Mode (6400/6500)Press buttons in sequence
- Relay/Triac Output Test - Latching Mode (6600/6605 Rotary)Align WASH CYCLES and HEAT OPTIONS knob indicators pointing towards Start/Cancel button (both…
- Relay/Triac Output Test - Latching Mode (6700/6900)Press buttons in sequence
- Relay/Triac Output Test - Latching Mode (6905)Press buttons in sequence
- Relay/Triac Output Test - Latching Mode (7000 Series)Press buttons in sequence
- Toggle Light Mode (7000 Series only)Hold SMART DRY and START/CANCEL buttons for 3 seconds or longer
Full entry steps, exit procedures, and test sequences are available in Max.
Related GE dishwasher models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass