mypros+
Model reference

GE GTD81GSSJ1WS

Dryer

2 documents13 error codes16 service modes

Available documentation

Service Manual

  • Gas Dryer Service Manual8 pg
    Covers this model
  • GE CleanSpeak™ Wi-Fi Connect Dryers Technical Service Guide57 pg
    Covers this model
MyPros+ Max

Diagnose your GE GTD81GSSJ1WS.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (13)

CodeMeaning
F01Inlet thermistor short circuit.F010Empty drum detected.F011Dry load detected.F02Outlet thermistor short circuit.F03Inlet thermistor open circuit.F04Outlet thermistor open circuit.F05EEPROM Error.F06Stuck buttonF07Mis-wireF08Door switch stuck closedF09Long dry timesF10Empty drum detected.F11Dry load detected (load already dry at start).

Service modes (16)

  • Field Service ModeFrom idle state, simultaneously press and hold the START button and rotate the cycle select knob…
  • Service Test ModeFrom an idle state, simultaneously press and hold the START button and rotate the cycle select knob…
  • Set Model IDWhile in Field Service Mode, navigate to Set Model ID test
  • t1 - Dryer ModelNavigate to t1 in service test mode and press START.
  • t2 - Software VersionNavigate to t2 in service test mode and press START.
  • t3 - XML CheckNavigate to t3 in service test mode and press START to scroll the memory version.
  • t4 - User Interface TestNavigate to t4 in service test mode and press START.
  • t5 - Fault CodesNavigate to t5 in service test mode and press START.
  • t6 - Outlet ThermistorNavigate to t6 in service test mode and press START.
  • t7 - Inlet ThermistorNavigate to t7 in service test mode and press START.
  • t8 - Moisture SensorNavigate to t8 in service test mode and press START.
  • t9 - Door Open/Door ClosedNavigate to t9 in service test mode and press START.
  • ta - CleanSpeak TestNavigate to ta in service test mode.
  • tb - Water Valve TestNavigate to tb in service test mode and press START.
  • tc - Restores EEPROMNavigate to tc in service test mode and press START.
  • td - Set ModelNavigate to td in service test mode and press START

Full entry steps, exit procedures, and test sequences are available in Max.

Related GE dryer models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax