Model reference
GE 649115064
Range
1 document12 error codes2 service modes
Available documentation
Service Manual
- GE Slide In Gas Range65 pg
MyPros+ Max
Diagnose your GE 649115064.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (12)
CodeMeaning
DOORDoor not locked for clean cycle, did not unlock after clean, door not closed at…F0Failed transistor in the Electronic Range Control (ERC).F1Failed transistor in the Electronic Range Control (ERC).F2Oven exceeded 590°F with door unlocked or exceeded 990°F with door locked; or…F3Open sensor or open sensor circuit, or sensor lead shorted to ground, or…F4Shorted sensor or short in sensor harness, or melted sensor connector…F5Failed transistor in the Electronic Range Control (ERC).F6Problem within time keeping circuits due to fluctuation of the 60 Hz power…F7Stuck function switch or button (BAKE, BROIL, CLEAN, etc.) on ERC.F8Component failure detected within ERC affecting temperature processing circuits.F9Problem with door lock circuit such as a pinched wire between ERC and door lock…LOCKLock switch circuit open (flashing LOCK is normal condition while locking or…Service modes (2)
- Bake Temperature Calibration (ERC-I)1. Push the BAKE button. 2. Select any temperature between 500°F and 550°F with the SET knob. 3…
- Bake Temperature Calibration (ERC-II)1
Full entry steps, exit procedures, and test sequences are available in Max.
Related GE range models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass