Model reference
GE JB968
Range
5 documents10 error codes11 service modes
Available documentation
Service Manual
- 30-In. Radiant Free Standing Range Technical Service Guide63 pg
- Owner's Manual - Radiant Self-Cleaning Convection Ranges53 pg
- 30" Radiant Free-standing Convection Range Service Manual3 pg
Tech Sheet
- Appliance Diagnostic Modes Range GE Consumer & Industrial Technical Training255 pg
Other
- JBP82install12 pg
MyPros+ Max
Diagnose your GE JB968.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (10)
CodeMeaning
F-Function error code indicated by F followed by a number or letter flashing in…F0Stuck key or shorted keypad detected on the control panel.F2Oven over-temperature condition detected by the control.F3Oven temperature sensor open circuit (open sensor).F4Oven temperature sensor shorted circuit (shorted sensor).F5Sensor circuit supervisor failure in the control board.F7Stuck or shorted function key on the keypad.F8Control board failure (internal ERC fault).F9Door lock/latch motor failureFFLoss of latch motor safety circuit.Service modes (11)
- F Code RecallPress together the TIMER and CLOCK (or 9) keys to recall stored F codes.
- J2S968/JGS968/JGSP48 Fault Code Recall["Press TIMER, CLOCK, and MIN DOWN (or 9) key to get Fault Codes to appear."]
- JB905/968/988 Fault Code Recall["Press TIMER and CLOCK (or 9) key to get Fault Codes to appear."]
- JP938/JP968 Cooktop Calibration Mode["Clear everything from the top of the glass.","Lock the control by pressing the LOCK key for 3…
- JP938/JP968 Cooktop Technician Mode["Lock cooktop by holding CONTROL LOCK key for 3 seconds.","Control will beep 2 times and LOCK…
- Key Panel TestTouch each keypad individually and verify proper response.
- LOC REF Procedure (JCK915/JCT915/JK915/JT915/JK955/JT955/ZEK938/ZET958)["Reinitiate LOC REF procedure by pressing BAKE/BROIL simultaneously.","For digital keypads press 9…
- Sales ModeEnter Special Functions (SF) mode first, then press the CLOCK and TIMER pads at the same time
- Special Functions (SF) ModePress and hold the BAKE and BROIL pads at the same time for 3 seconds until the display shows SF.
- Thermostat AdjustmentTouch the BROIL HI/LO and BAKE pads at the same time for 3 seconds until the display shows SF
- Trivection Service Mode["Disconnect main power to the oven for at least 15 seconds.","Reconnect power and enter 0803 on…
Full entry steps, exit procedures, and test sequences are available in Max.
Related GE range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass