mypros+
Model reference

GE JBP60BB

Range

2 documents9 error codes6 service modes

Available documentation

Service Manual

  • Technical Service Guide 1999 Spectra™ Series - Free-standing Electric Ranges W/ Truetemp™39 pg
    Covers this model

Tech Sheet

  • Appliance Diagnostic Modes Range GE Consumer & Industrial Technical Training255 pg
    Covers this model
MyPros+ Max

Diagnose your GE JBP60BB.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (9)

CodeMeaning
F0Stuck key or shorted keypad detected on the control panel.F2Oven over-temperature condition detected by the control.F3Oven temperature sensor open circuit (open sensor).F4Oven temperature sensor shorted circuit (shorted sensor).F5Sensor circuit supervisor failure in the control board.F7Stuck or shorted function key on the keypad.F8Control board failure (internal ERC fault).F9Door lock/latch motor failureFFLoss of latch motor safety circuit.

Service modes (6)

  • J2S968/JGS968/JGSP48 Fault Code Recall["Press TIMER, CLOCK, and MIN DOWN (or 9) key to get Fault Codes to appear."]
  • JB905/968/988 Fault Code Recall["Press TIMER and CLOCK (or 9) key to get Fault Codes to appear."]
  • JP938/JP968 Cooktop Calibration Mode["Clear everything from the top of the glass.","Lock the control by pressing the LOCK key for 3…
  • JP938/JP968 Cooktop Technician Mode["Lock cooktop by holding CONTROL LOCK key for 3 seconds.","Control will beep 2 times and LOCK…
  • LOC REF Procedure (JCK915/JCT915/JK915/JT915/JK955/JT955/ZEK938/ZET958)["Reinitiate LOC REF procedure by pressing BAKE/BROIL simultaneously.","For digital keypads press 9…
  • Trivection Service Mode["Disconnect main power to the oven for at least 15 seconds.","Reconnect power and enter 0803 on…

Full entry steps, exit procedures, and test sequences are available in Max.

Related GE range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass