Model reference

GE JGSP31GER

Range

2 documents14 error codes2 service modes

Available documentation

Service Manual

Technician Manual - General Electric 30 Inch Slide-in Gas Ranges65 pg
Covers this model
GE Appliances Service Training Technician Manual - General Electric 30 Inch Slide-In Gas Ranges65 pg
Covers this model

MyPros+ Max

Diagnose your GE JGSP31GER.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·GE Range

DOOR on my GE JGSP31GER

M+

Door not locked for clean cycle, did

From Service Manual 723327, p.19:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure door lock assembly resistance across PTC terminals. Expected: ~200 ohms cold.

3.Inspect strike and latch alignment. A misaligned strike prevents the switch stack from closing.

Part WH44X10288

Door lock assembly

Error codes (14)

CodeMeaning

DOORDoor not locked for clean cycle, did not unlock after clean, door not closed at…F0Failed transistor in the ERC control.F1Failed transistor in the ERC control.F2Oven exceeded 590°F with door unlocked or exceeded 990°F with door locked; may…F3Open sensor or open sensor circuit; sensor lead shorted to ground; or…F4Shorted sensor or short in sensor harness; may be caused by melted sensor…F5Failed transistor in the ERC-I control.F6Problem within time keeping circuits due to fluctuation of the 60 Hz power…F7Stuck function switch or button (BAKE, BROIL, CLEAN, etc.) on ERC-I.F8Component failure detected within ERC affecting temperature processing circuits.F9ERC-I FFFailed transistor in the ERC-II control.LOCKLock switch circuit open (flashing LOCK on display), which may be caused by…LOCK FLASHINGLock switch circuit is open (normal while locking/unlocking); may indicate open…

Service modes (2)

Bake Temperature Calibration (ERC-I)1
Bake Temperature Calibration (ERC-II)1

Full entry steps, exit procedures, and test sequences are available in Max.

Related GE range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass