Model reference

Hotpoint WT540P

Washer

1 document14 error codes4 service modes

Available documentation

Service Manual

Hotpoint Washing Machines Aquarius Service Information32 pg
Covers this model

MyPros+ Max

Diagnose your Hotpoint WT540P.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (14)

CodeMeaning

F01Motor triac short circuit.F02Motor jammed or tacho detached/short/open circuit.F03NTC thermistor short or open circuit, or heater relay stuck.F04Pressure switch jammed on empty F05Machine will not empty or pressure switch stuck in full position, or pump…F07Heater relay stuck or element open circuit (signalled when pressure switch is…F08Heater relay stuck on or pressure switch stuck on full.F09Machine setup error (EEPROM issue).F10No full or empty signal from pressure switch.F11Drain pump disconnected or cannot be activated.F12No communication between Display Board and Power Module.F17No supply to door lock or door open.F18Communication error between 3 phase motor control and power module.H20A problem with the water supply.

Service modes (4)

Auto Test (Hardware Key diagnostic)["Ensure the machine is switched off and remove the serial port cap.","Insert Hardware Key (Part…
Demo Mode Version 1["From the default screen of a programme after switching the appliance on, press both…
Demo Mode Version 2["From the default screen of a programme after switching the appliance on, press both…
Demo Mode Version 3["Press 'On/Off' and 'Start/Cancel' together with the top left option button until 'd On' appears."]

Full entry steps, exit procedures, and test sequences are available in Max.

Related Hotpoint washer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass