mypros+
Model reference

KitchenAid KEBS107SSS03

Oven

9 documents49 error codes17 service modes

Available documentation

Tech Sheet

  • Tech Sheet - W10220953 - Rev A (FR)12 pg
    Covers this model
  • Tech Sheet - W1022095212 pg
    Covers this model
  • TECH SHEET - Whirlpool Oven KEBS107SSS0012 pg
    Covers this model

Service Manual

  • KitchenAid Electric Built-In Single Oven60 pg
    Covers this model

Service Flash

  • Technical Service Pointer #W10555846A - KitchenAid 27" and 30" Wall Ovens3 pg
    Covers this model
  • Service Pointer - W10555846 - Rev C (Inner Door Glass)3 pg
    Covers this model
  • Service Pointer - W10540280 (Door Latch Assembly)4 pg
    Covers this model

Installation Guide

  • Installation Instructions16 pg
    Covers this model
  • Installation Instructions8 pg
    Covers this model
MyPros+ Max

Diagnose your KitchenAid KEBS107SSS03.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (49)

CodeMeaning
F0Default F codeF0 E0No failure (GOOD)F0E0No error(s) found (Good)F1 E0Internal failureF1 E1Internal failureF1-E0Key held down too long, or key is shorted.F1-E1Keypad keytail not connected.F1-E5Cancel key drive line open.F1E0Internal failureF1E1Internal failureF2Electronic control malfunction.F2 E0Keypad disconnected.F2 E1Stuck or shorted key on keypad.F2E0Keypad disconnected.F2E1Stuck key / shorted key.F3 E0Main oven sensor shorted or open.F3 E1Lower main oven sensor shorted or open.F3 E2Warming drawer sensor shorted.F3 E3Meat probe shorted.F3-E0Temperature sensor opened.F3-E1Temperature sensor shorted.F3-E2Oven temperature too high (over 575°F in Cook mode).F3-E3Oven temperature too high (over 950°F in Clean mode).F3E0Main oven temperature sensor open or shorted.F3E1Lower main oven sensor open or shorted.F3E2Warming drawer sensor shorted.F3E3Meat probe shorted.F4-E1Meat probe malfunctionF5 E0Door and latch switch do not agree.F5 E1Door latch not operating.
View all 49 error codes
F5-E0Door is open but latch is locked (door switch closed indicating open door and…F5-E1Self clean latch will not lock.F5-E5Self clean temperature (550°F) not reached within 45 minutes.F5-E7Self clean latch will not unlock.F5E0Door and latch switch do not agree.F5E1Door latch not operating.F6 E0Lost communications between user interface and appliance manager.F6 E1Cook oven over temperature.F6 E2Clean oven over temperature.F6 E3Mini oven/warm drawer over temperature.F6 E4User interface/appliance manager mismatch.F6 E5No cavity size commandF6-E0Return line not connected.F6E0Lost communication between user interface and appliance manager.F6E1Cook oven over temperature.F6E2Clean oven over temperature.F6E3No cavity size command.F6E4User interface / appliance manager mismatch.F6E5Mini oven / warm drawer over temperature.

Service modes (17)

  • Cavity Size Programming["Unplug oven or disconnect power.","Wait 10 seconds, then plug in oven or reconnect power.","Enter…
  • cavity_size_programming["Disconnect power from the oven.","Wait 10 seconds, then reconnect power.","Press OFF, OFF, START…
  • Clear Last Error Code["Unplug oven or disconnect power.","Wait 10 seconds, reconnect or plug in oven.","Enter…
  • clear_last_error_code["Disconnect power from the oven.","Wait 10 seconds, then reconnect power.","Press OFF, OFF, START…
  • component_activation_tests["Enter diagnostic mode (OFF, OFF, START) within 120 seconds of powering on.","Press BAKE to…
  • diagnostic["Disconnect power from the oven.","Wait 10 seconds, then reconnect power.","Press OFF, OFF, START…
  • Diagnostic ModePress OFF, OFF, START
  • Diagnostic Mode - Troubleshooting KeystrokesWhile in Diagnostic Mode (OFF, OFF, START), use the following keys
  • Diagnostics Mode["Press OFF key to place the oven in idle state.","Press OFF, OFF, START to enter Diagnostics…
  • Fahrenheit to Celsius ConversionPress OPTIONS then '1' to toggle temperature between Fahrenheit and Celsius settings.
  • Fault Code History RecallPress and hold the 0 touchpad for 5 seconds to access the previous fault codes
  • Oven Temperature Calibration["Press OPTIONS and then 6 to set the calibration.","On double ovens only, press UPPER OVEN or…
  • Oven Temperature Calibration Adjustment["Press OPTIONS and then 6 to set the calibration.","On double ovens only, press UPPER OVEN or…
  • Programming Cavity SizeWithin 60 seconds of power up, press
  • Sabbath Mode ExitPress OPTIONS and '7' to end Sabbath mode.
  • Temperature Calibration Adjustment1
  • Temperature Unit Toggle (Fahrenheit/Celsius)["Press OPTIONS.","Press 1 to toggle temperature between Fahrenheit and Celsius settings."]

Full entry steps, exit procedures, and test sequences are available in Max.

Related KitchenAid oven models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass