Model reference

KitchenAid KEBS147DBL0

Oven

2 documents22 error codes6 service modes

Available documentation

Tech Sheet

Kitchenaid Oven KEBS147DBL0 Tech Sheet8 pg
Covers this model

Service Manual

KitchenAid Electric Built-In Single Oven60 pg
Covers this model

MyPros+ Max

Diagnose your KitchenAid KEBS147DBL0.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·KitchenAid Oven

F0 on my KitchenAid KEBS147DBL0

M+

Default F code — No failure; will only

From Tech Sheet W16524541, p.33:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (22)

CodeMeaning

F0Default F code F1Wiring harness cavity size does not match previously stored value; the Cavity…F1 (All Other E Codes)Electronic control malfunction (when the E code is not E3).F1-E0Key held down too long, or key is shorted.F1-E1Keypad keytail not connected.F1-E5Cancel key drive line open.F2Electronic control malfunction.F3Temperature sensor opened or shorted.F3-E0Temperature sensor opened.F3-E1Temperature sensor shorted.F3-E2Oven temperature too high (over 575°F in Cook mode).F3-E3Oven temperature too high (over 950°F in Clean mode).F4Oven temperature too high F4-E1Meat probe malfunction F5Self clean latch will not lock, oven did not reach self clean temp after 30…F5-E0Door is open but latch is locked (door switch closed indicating open door and…F5-E1Self clean latch will not lock.F5-E5Self clean temperature (550°F) not reached within 45 minutes.F5-E7Self clean latch will not unlock.F6Switch pulse return line is not connected; electronic control will display F6…F6-E0Return line not connected.F7Common switch wire (+30VDC/5Hz) to latch switch and door switch is shorted to…

Service modes (6)

Bake Temperature Offset Adjustment1
Default Fault Code DisplayPress and hold "0" key for 5 seconds
Fahrenheit to Celsius ConversionPress the BROIL pad for 5 seconds
Fault Code History RecallPress and hold the 0 touchpad for 5 seconds to access the previous fault codes
Programming Cavity SizeWithin 60 seconds of power up, press
Sabbath Mode ExitIf 'SAB' appears in the display, press and hold the 6 touchpad for 5 seconds to end the Sabbath…

Full entry steps, exit procedures, and test sequences are available in Max.

Related KitchenAid oven models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass