mypros+
Model reference

KitchenAid KEMS309BSP00

Oven

11 documents25 error codes4 service modes

Available documentation

Tech Sheet

  • Whirlpool Oven KEMS379BSS00 W10492441 Tech Sheet32 pg
    Covers this model

Service Flash

  • KitchenAid 27" and 30" Combination Wall Ovens - Technical Service Pointer3 pg
    Covers this model
  • Service Pointer - W10585108 - Rev A (Preheat Temperatures)6 pg
    Covers this model
  • Technical Service Pointer W10585108A6 pg
    Covers this model
  • Technical Service Pointer W10563362A - Warming Drawer Handle Heat Concern5 pg
    Covers this model
  • Technical Service Pointer #W10563362B5 pg
    Covers this model
  • Delivery & Installation Pointer W105951624 pg
    Covers this model
  • Technical Service Pointer - W10692944 (Vibration Noise)6 pg
    Covers this model
  • Service Pointer - W10563362 - Rev B (Warming Drawer Handle)5 pg
    Covers this model

Tech Tip

  • installerlabel-w10643344-reva.pdf2 pg
    Covers this model

Other

  • W106894086 pg
    Covers this model
MyPros+ Max

Diagnose your KitchenAid KEMS309BSP00.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (25)

CodeMeaning
E0Keypad not connected, or key held down too long, or key is shortedE1Temperature sensor opened (when displayed on upper/left side) or temperature…E1 E5Oven user interface failure.E3Keypad errorF0Default F codeF1Electronic control malfunction (when E code is not E3); or keypad not connected…F2Door latch error during Self-CleanF2 E0Keypad disconnected.F2 E1Stuck/shorted key on keypad.F3Temperature sensor opened (E0) or temperature sensor shorted (E1).F3 E0Oven sensor (humidity sensor 1600 or oven cavity sensor) open or shorted.F3 E4Microwave Oven Humidity Sensor Error.F3 EOOven sensor open or shorted (humidity sensor 1600).F4 E1Main oven sensor open or shorted.F4 E4Microwave Oven Cavity Temperature Sensor error (thermistor failure).F5Oven temperature too highF5 E0Door and latch switch do not agree.F5 E1Latch not operating.F5 EODoor and latch switch do not agree.F6 E0Oven user interfaceF6 E1Over temperature during operation/self-clean.F6 E5No cavity size command.F6 E6Oven appliance manager 1 (upper, single)F6 E8Lost communications with Microwave Oven Appliance Manager.Microwave Oven Inverter ErrorMicrowave oven inverter communication or operation error.

Service modes (4)

  • Diagnostics Mode 1Within 2 minutes of power up, press CANCEL > CANCEL > START
  • Diagnostics Mode 2After 2 minutes of power up, press CANCEL > CANCEL > START
  • Mode 1 - Full Diagnostic (within 2 minutes of power up)1. Power up the oven. 2. Within 2 minutes of power up, press CANCEL > CANCEL > START. 3. If control…
  • Mode 2 - Limited Diagnostic (after 2 minutes of power up)1

Full entry steps, exit procedures, and test sequences are available in Max.

Related KitchenAid oven models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass