Model reference
KitchenAid KOCE500EWH09
Oven
3 documents28 error codes24 service modes
Available documentation
Tech Sheet
- Tech Sheet W11491758 RevA2 pg
Service Manual
- 27 & 30 Inch Microwave Combination Wall Ovens Job Aid60 pg
Installation Guide
- Installation Instructions16 pg
MyPros+ Max
Diagnose your KitchenAid KOCE500EWH09.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (28)
CodeMeaning
F1E0Oven user interface (UI) failure.F1E1Internal Oven ACU (Appliance Control Unit) error.F1E4Microwave Oven Relay 4903 error.F1E5Microwave Oven Inverter error.F1E6Microwave Generation error.F2E0Keypad disconnected.F2E1Stuck/shorted key.F3E0Main oven sensor open or shorted.F3E3Meat Probe Connector Jack or Meat Probe shorted.F4E1Microwave Cavity Temperature Sensor error.F4E2Magnetron Temperature Sensor error.F4E4Microwave Oven Humidity Sensor error.F4E8Inverter over temperature.F4E9Inverter and Magnetron over temperature.F5E0Door and latch switch do not agree.F5E1Latch not operating.F6Over-temperature at user interface.F6E0Oven user interface lost communication.F6E1Over temperature.F6E4User Interface / Appliance Manager state status mismatch.F6E6Oven appliance manager lost communication.F6E8Lost communications with Microwave Oven Appliance Manager.F6EAUser interface over temperature (KitchenAid models only).F8E0Product not wired correctly (cooling fan related).F8E1Low fan speed overspeed.F8E2High fan speed underspeed.F8E3High fan speed overspeed.F9E0Product not wired correctly.Service modes (24)
- Cavity Size SelectEnter Diagnostics mode (CANCEL > CANCEL > START), press numeric '3' or '6' keys to scroll to cavity…
- Cavity Size Select (KitchenAid models)Enter Diagnostics mode (CANCEL > CANCEL > START)
- cavity_size_select1
- Component Activation (JennAir models)Enter Diagnostics Mode, then touch or scroll to 'Component Activation' in the Diagnostics menu and…
- diagnostic1
- Diagnostic Mode1. Press LOWER OVEN > LOWER LIGHT > LOWER CANCEL (repeat two more times, total of 3 sequences). TIP
- Diagnostic Mode (JennAir - touchscreen models)Press LOWER OVEN > LOWER LIGHT > OVEN CANCEL, repeat two more times (3 total sequences)
- Diagnostic Mode (KitchenAid models)Press CANCEL > CANCEL > START
- Diagnostics modePress CANCEL > CANCEL > START
- Error Codes (Faults Screen)Enter Diagnostics mode (CANCEL > CANCEL > START), then press numeric '3' or '6' keys to scroll to…
- Error Diagnostics (JennAir models)Enter Diagnostics Mode, then touch or scroll to 'Error Diagnostics' and touch 'OK'
- error_code_view1
- Faults Screen (KitchenAid models)Enter Diagnostics mode (CANCEL > CANCEL > START)
- Model Selection (JennAir models)Enter Diagnostics Mode
- Model Selection (within Diagnostic Mode)["Plug in oven or connect power.","Enter Diagnostics Mode.","Touch or scroll to 'System…
- Model Selection Procedure1
- Relay ActivationEnter Diagnostics mode (CANCEL > CANCEL > START), then press numeric '3' or '6' keys to scroll to…
- Relay Activation (KitchenAid models)Enter Diagnostics mode (CANCEL > CANCEL > START)
- relay_activation1. Enter diagnostic mode (CANCEL > CANCEL > START). 2. Press key 3 or 6 until the Relay Activation…
- Sensors and Switches (JennAir models)Enter Diagnostics Mode, then touch or scroll to 'Sensors and Switches' and touch 'OK'
- Status ScreenEnter Diagnostics mode (CANCEL > CANCEL > START)
- Status Screen (KitchenAid models)Enter Diagnostics mode (CANCEL > CANCEL > START)
- status_screen1
- System Information (JennAir models)Enter Diagnostics Mode, then touch or scroll to 'System Information' and touch 'OK'
Full entry steps, exit procedures, and test sequences are available in Max.
Related KitchenAid oven models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass