Model reference

KitchenAid KOCE507EWH11

Oven

1 document47 error codes10 service modes

Available documentation

Installation Guide

Installation Instructions16 pg
Covers this model

MyPros+ Max

Diagnose your KitchenAid KOCE507EWH11.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·KitchenAid Oven

F1 E0 on my KitchenAid KOCE507EWH11

M+

Oven user interface failure (internal).

From Tech Sheet W16879304, p.36:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (47)

CodeMeaning

F1 E0Oven user interface failure (internal).F1 E1Internal oven Appliance Manager error.F1 E4Microwave oven relay error.F1 E5Microwave oven inverter error.F1 E6Microwave generation error.F1E0Internal failure of the oven user interface (UI).F1E1Microwave oven relay error.F1E4Microwave oven inverter error.F1E5Microwave oven inverter error.F1E6Microwave generation error.F2 E0Keypad disconnected.F2 E1Stuck/shorted keypad.F2E0Keypad disconnected.F2E1Key stuck / short-circuited on keypad.F3 E0Main oven sensor open or shorted.F3 E3Meat probe connector jack or meat probe shorted.F3E0Main oven sensor open or short-circuited.F3E1Meat probe connector jack or meat probe shorted.F3E3Meat probe or meat probe connector jack short-circuited.F4 E1Microwave cavity temperature sensor error.F4 E2Magnetron temperature sensor error.F4 E4Microwave oven humidity sensor error.F4 E8Inverter over temperature.F4 E9Inverter and magnetron over temperature.F4E2Magnetron Temperature Sensor Error.F4E4Microwave Oven Humidity Sensor Error.F4E8Inverter Over Temperature.F4E9Inverter and Magnetron Over Temperature.F5 E0Door and latch switch do not agree.F5 E1Latch not operating.

View all 47 error codes

F5E0Mismatch between door and latch switches.F5E1Oven latch inoperative.F6Over-temperature at user interface.F6 E0Oven user interface lost communication / Oven appliance manager lost…F6 E1Over temperature.F6 E4User interface / Appliance manager state status mismatch.F6 E6Lost communication (context F6 E8Lost communications with microwave oven appliance manager.F6 EAUser interface over temperature.F6E0Oven user interface F6E1Over-temperature condition.F6E4Status state mismatch between user interface and appliance manager.F6E6Oven manager F6E8Loss of communication with microwave oven manager.F6EAUser Interface Over Temperature.F9 E0Product not wired correctly.F9E0Product is not properly connected/plugged in.

Service modes (10)

Cavity Size Select1
cavity_size_select1
diagnostic1
Diagnostics ModePress CANCEL > CANCEL > START
Error Code Viewing and Clearing1
error_code_view1
Relay Activation1
relay_activation1. Enter diagnostic mode (CANCEL > CANCEL > START). 2. Press key 3 or 6 until the Relay Activation…
Status Screen1
status_screen1

Full entry steps, exit procedures, and test sequences are available in Max.

Related KitchenAid oven models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass