Model reference

KitchenAid KESV908PMT01

Range

6 documents30 error codes1 service mode

Available documentation

Tech Sheet

Tech Sheet - 976106312 pg
Covers this model

Service Flash

Service Pointer K81786211 pg
Covers this model
Service Pointer - 8178621 - No Power to Oven2 pg
Covers this model
Service Pointer - Oven Temperature Calibration1 pg
Covers this model
Service Pointer - 8178524 (Oven Temperatures)1 pg
Covers this model

Bulletin

Service Pointer - 8178557 - Unit Does Not Work After Self-Clean Cycle2 pg
Covers this model

MyPros+ Max

Diagnose your KitchenAid KESV908PMT01.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·KitchenAid Range

F0 E0 on my KitchenAid KESV908PMT01

M+

No failure (default state).

From Tech Sheet W14831977, p.29:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (30)

CodeMeaning

F0 E0No failure (default state).F1 E0Internal error on the display board.F1 E1Internal error on the display board.F1 E2Internal error on the display board.F1 E3Internal error on the display board.F1 E4Internal error on the display board.F1 E5Internal error on the power board.F1 E6Internal error on the power board.F1 E7Internal error on the power board.F1 E8Internal error on the power board.F1 E9Internal error on the display board.F2 E0Stuck key (shorted key) on keypad.F2 E1Keypad disconnected.F3 E0Main oven sensor open (top oven sensor opened).F3 E1Main oven sensor shorted (top oven sensor shorted).F3 E2Meat probe shorted.F3 E4Bottom oven sensor open (bottom/lower oven sensor open).F3 E5Lower/bottom oven sensor shorted.F3 E6Warming drawer sensor open.F3 E7Warming drawer sensor shorted.F4 E2Over temperature during cook mode (temperature runaway).F4 E3Over temperature during clean mode (temperature runaway).F4 E7Over temperature cavity 2 (temperature runaway error).F5 E0Door latch mismatch F5 E1Latch not operating (no operating latch).F5 E2Door switch fault.F5 E4Latch switch fault.F5 E7Unlock door error F6 E4Lost communication between power board and display board.F6 E5Cancel key error.

Service modes (1)

Diagnostics mode["Press the Cancel key to place the range in an idle state.","Press the Cancel and Start keys in…

Full entry steps, exit procedures, and test sequences are available in Max.

Related KitchenAid range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass