Model reference
KitchenAid KGRT600
Range
1 document8 error codes5 service modes
Available documentation
Service Manual
- Technical Education Job Aid 4317337 KAC-35 Self-cleaning Slide-in Gas Range80 pg
MyPros+ Max
Diagnose your KitchenAid KGRT600.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (8)
CodeMeaning
F1Control board failure.F1 E3Control fault requiring Timer ID verification and reconfiguration.F2Keypad assembly failure.F3Oven temperature sensor failure.F4Meat probe failure.F5Input switches failure during clean cycle (door switch or door latch switch).F7Input switches failure in all modes except clean (door switch or door latch…PFPower failure has occurred.Service modes (5)
- End of Service Test Sequence (Convection Units)["Connect power to the range.","Set Power to On and wait until 'Control Lock' clears in the display…
- End of Service Test Sequence (Non-Convection Units)["Connect power to the range.","Set Power to On and wait until 'Control Lock' clears in the display…
- F1 E3 Fault Error Recovery / Timer ID Configuration (Convection)["Power off and wait 5 seconds.","Power on and wait 5 seconds.","Press CONV
- F1 E3 Fault Error Recovery / Timer ID Configuration (Non-Convection)["Power off and wait 5 seconds.","Power on and wait 5 seconds.","Press CLEAN.","Press STOP…
- Oven Temperature Calibration["Press and hold the BAKE keypad for 5 seconds.","The current offset (if any) will be shown in the…
Full entry steps, exit procedures, and test sequences are available in Max.
Related KitchenAid range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass